Abstract:Capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C 4 D) has the advantages of high throughput (simultaneous detection of multiple ions), high separation efficiency (higher than 10 5 theoretical plates) and rapid analysis capability (less than 5 min for common inorganic ions). A compact CE-C 4 D system is ideal for water quality control and on-site analysis. It is suitable not only for common cations ( e.g. Na + , K + , Li + , NH 4 + , Ca 2+ , etc .) and anions ( e.g. Cl − , SO 4 2− , BrO 3 − , etc .) but also for some ions ( e.g. lanthanide ions, Pb 2+ , Cd 2+ , etc .) that require complex derivatization procedures to be detected by ion chromatography (IC). However, an obvious limitation of the CE-C 4 D method is that its sensitivity ( e.g. 0.3–1 μM for common inorganic ions) is often insufficient for trace analysis ( e.g. 1 ppb or 20 nM level for common inorganic ions) without preconcentration. For this technology to become a powerful and routine analytical technique, the system should be made compact while maintaining trace analysis sensitivity. In this study, we developed an all-in-one version of the CE-C 4 D instrument with custom-made modular components to make it a convenient, compact and high-performance system. The system was designed using direct digital synthesis (DDS) technology to generate programmable sinusoidal waveforms with any frequency for excitation, a kilovolt high-voltage power supply for capillary electrophoresis separation, and an "effective" differential C 4 D cell with a low-noise circuitry for high-sensitivity detection. We characterized the system with different concentrations of Cs + , and even a low concentration of 20 nM was detectable without preconcentration. Moreover, the optimized CE-C 4 D setup was applied to analyse mixed ions at a trace concentration of 200 nM with excellent signal-to-noise ratios. In typical applications, the limits of detection based on the 3 σ criterion (without baseline filtering) were 9, 10, 24, 5, and 12 nM for K + , Cs + , Li + , Ca 2+ , and Mg 2+ , respectively, and about 7, 6, 6 and 6 nM for Br − , ClO 4 − , BrO 3 − and SO 4 2− , respectively. Finally, the setup was also applied for the analysis of all 14 lanthanide ions and rare-earth minerals, and it showed an improvement in sensitivity by more than 25 times.

A Multi-Ion Interference Decoupling Model Based on Ion-selective Electrode Arrays

Multiplex Analysis of Fundamental Surface Water Quality Indicators by Multichannel Electrochemical Device Combined with MFCSC Model

Development of Machine Learning Models for Ion-Selective Electrode Cation Sensor Design

Modeling Non-Equilibrium Ion-Transport in Ion-Selective-Membrane/Electrolyte Interfaces for Electrochemical Potentiometric Sensors

Steady-State and Transient Performance of Ion-Sensitive Electrodes Suitable for Wearable and Implantable Electro-Chemical Sensing

Nonequilibrium Anion Detection in Solid-Contact Ion-Selective Electrodes

Modeling of NO_3~- Ion-Selective Electrode

All-solid-state Potentiometric Sensor Using Single-Walled Carbon Nanohorns As Transducer

Characterization and Calibration of Sulphate ISE with Complex Membrane as Ionophore

Decoupling ion concentrations from effluent conductivity profiles in capacitive and battery electrode deionizations using an artificial intelligence model

Complementary Metal–Oxide–Semiconductor Potentiometric Field-Effect Transistor Array Platform Using Sensor Learning for Multi-ion Imaging

Accurate ion type and concentration detection using two bare electrodes by machine learning of non-faradaic electrochemical impedance measurements of an automated fluidic system

A Study of Virtual Ion Electrode

Improving Sensitivity for Microchip Electrophoresis Interfaced with Inductively Coupled Plasma Mass Spectrometry Using Parallel Multichannel Separation

Recent advances in solid-contact ion-selective electrodes: functional materials, transduction mechanisms, and development trends.

A compact and high-performance setup of capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-C 4 D)

The Saha Ionisation Equilibrium Shift Correction Model Applied to MPT-OES for Analysing of Complex Matrix Samples: an Example for Brine Samples

An electrophoretic ion analyzer for on-site autonomous water monitoring

A Floating Capsule Electrochemical System for In Situ and Multichannel Ion-Selective Sensing

Electrokinetic Ion Rectification coupled with Surface Charge and Thermal Dependence in the Conical Nanochannel

Non-Equilibrium Nitrate Detection in Ionophore-Based Solid-Contact Ion-Selective Electrodes