Abstract:To reduce the secondary emission yield of an RF window ceramic so as to suppress the occurrence of a multipactor, we propose coating the window with a titanium nitride (TiN) film by atomic layer deposition. We investigate two groups of samples with film thicknesses of 56 and 8 nm, respectively, to analyze the composition and optimize the coating thickness of the TiN film on the ceramic. For the first group of samples (56 nm films), x-ray photoelectron spectroscopy (XPS) results show that the film can be divided into three mixed layers: a top layer composed of TiOxNy and TiO2; a middle layer consisting of TiN, TiOxNy, TiO2, and TiC; and a bottom layer called a diffusion layer, formed by decreasing TiN, TiOxNy, TiO2, TiC, and increasing <math> A l 2 O 3</math> as the ceramic is approached. The depth of this bottom layer is ∼8 nm. Two more films (8 nm films) in the second group of samples were grown on a 96 ceramic and silicon to determine the sheet resistance, those on silicon is ∼1 kΩ/□ as measured by spectroscopic ellipsometry. According to the XPS results of the two 8 nm films, the content of TiOxNy and TiO2 increased while TiN content decreased in the film on 96 ceramic, compared to the film on silicon. Therefore, the 8 nm film is suitable for use as a coating for the RF window to weaken the multipactor effect and lower conductivity. To test the film performance, an RF ceramic window is coated with an 8 nm TiN film. Low-power measurements show that, within a frequency of 100 MHz, the 8 nm film on the RF ceramic window has a negligible effect on its transmission characteristics. 8 kW RF power tests indicate that the film coating can significantly improve the power transmission, anti-multipaction, and stability of the RF window.

Multipacting mitigation by atomic layer deposition: the case study of Titanium Nitride

AFM Study on the Surface Morphologies of TiN Films Prepared by Magnetron Sputtering and Al2O3 Films Prepared by Atomic Layer Deposition

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

Plasma-enhanced atomic layer deposition of titanium nitride for superconducting devices

Investigation of TiN film on an RF ceramic window by atomic layer deposition

Reducing two-level system dissipations in 3D superconducting Niobium resonators by atomic layer deposition and high temperature heat treatment

Isotropic plasma-thermal atomic layer etching of superconducting TiN films using sequential exposures of molecular oxygen and SF$_6/$H$_2$ plasma

Area-Selective Atomic Layer Deposition of TiN Using Trimethoxy(octadecyl)silane as a Passivation Layer

Structural characterization of tantalum nitride films as wet etch stop layer in advanced multiwork function metal gate MOSFETs

Developments of TaN ALD Process for 3D Conformal Coatings

Ultralow Electron Emission Yield Achieved on Alumina Ceramic Surfaces and Its Application in Multipactor Suppression

ALD TaN Barrier for Enhanced Performance with Low Contact Resistance for 14nm Technology Node Cu Interconnects

Ion-beam Assisted Sputtering of Titanium Nitride Thin Films

Highly-Conformal TiN Thin Films Grown by Thermal and Plasma-Enhanced Atomic Layer Deposition

Effect of various nanoparticle fillers on the thermal contact resistance (TCR) between crystals and aluminium alloys materials

(AlCrNbSiTi)N/TiN multilayer films designed by a hybrid coating system combining high-power impulse magnetron sputtering and cathode arc deposition

ALD TaN from PDMAT in TSV Architectures

Atomic Layer Deposition Tin Barrier Layers For Through Silicon Via Applications

Face-centered-cubic titanium in Ti/Al multilayer thin films synthesized by magnetron sputtering technique

Tunneling spectroscopy of superconducting MoN and NbTiN grown by atomic layer deposition

Size Dependent Strengthening in High Strength Nanotwinned Al/Ti Multilayers