Abstract:For single-core cables widely used in high or super-high power systems, induction voltage will cause circulating current flowing in the loop of the cable sheaths and the earth or the reflux wires. This current will produce additional losses, so as to reduce the current capacity of the cables, and the grounding wire will be burnt out when the heating effect is serious. Analyses on the circulating current in cable systems have been reported in some documents, but they are only for single circuit networks. In recent years however, two- and three-circuit cable networks are increasingly applied in cities, so accordingly the determination of the circulating current in these arrangements causes much attention. Thus the research work is focused on the calculation method for circulating current of a two-circuit cable network in linear arrangement. What presented first is the equivalent circuit for the circulating current calculation. Then the equations to calculate the circulating current in metal sheaths of two-circuit arranged cables are deduced and the basic principles of the solution program for this specific issue are provided. After parameter values are assigned according to the lay and operation condition of cables in two-circuit arrangement of a power designing institute, the circulating current in cross-bonded cable sheaths in linear arrangement are calculated. According to the calculation results, the analyses on influencing factors are carried out, and some possible ways to reduce the circulating currents are presented, such as to increase the earth resistance, to lay cables closely, and to make the cable length of every cross-interconnect segment equal. Besides, results from the single-circuit linear arrangement are also provided, for the comparison to be made with the two-circuit one. It is shown that two-circuit arrangement cannot be simplified as single-circuit when calculating circulating currents in cable sheaths. Although the calculation equations and the solution program in this paper are specially for the two-circuit linear-arranged cable networks, the technique for equation deduction and program design can be extended to cables in other lay conditions of two-circuit arrangement or even more circuit number.

Analytical Formula for Calculations of Armour Losses in Three-Core Power Cables

Real‐time Calculation of Three Core Cable Conductor Temperature Based on Thermal Circuit Model with Thermal Resistance Correction

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Calculation of Loss Factors for Metal Sheath and Armour of HV Cables

Loss Allocation in Submarine Armored Three-core HVAC Power Cables

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

Investigation on Loss Reduction Strategies of Single-Core HVAC Submarine Cables

An Investigation on Grounding System of AC Single-core Submarine Cable Based on Multi-conductor Analysis Theory

On Simplified 3D Finite Element Simulations of Three-core Armored Power Cables

Experimental validation of ultra-shortened 3D finite element electromagnetic modeling of three-core armored cables at power frequency

An Equivalent Cross-Section Model for CORC Cable to Achieve Accurate AC Loss Estimations

Analysis of the eddy current loss and economy study in underground cable duct

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

Comparison of Different Methods for Calculating Electrical Parameters of Power Cables

Numerical Calculation of Real-Time Ampacity of High Voltage Power Cable Duct Laying Based on Environmental Information

Calculation of Circulating Current in Sheaths of Two-circuit Arranged Cables and Analyses of Influencing Factors

3D FEM Modelling of CORC Commercial Cables with Bean's like magnetization currents and its AC-Losses Behaviour

Improved thermal analysis for three-core cable under unbalanced three-phase loads

Calculation and Measurement of Transport AC Loss of Re BCO CORC Cables for Electric Aircraft

Calculation of Eddy Current Losses in XLPE Cables by FEM