Abstract:The number of high-voltage parallel cables is rapidly increasing. The alternating magnetic field generated by the working current of power cable cores induces voltage in the adjacent metal sheath; if the sheath and earth form a circuit, the metal sheath will create a circulating current, resulting in a reduction in the load capacity of power cable and the life of cable insulation. This paper uses MATLAB to construct a model for calculating the circulating current of cables connected in parallel in the same phase, and the effects of cable arrangement, phase sequence, and loop distance of cables connected in parallel on the sheath circulating current are investigated. The induced voltage in power cable sheaths is decomposed into two components, i.e., the component resulting from the core current and the component resulting from the metal sheath. Two new sheath connection methods are proposed to suppress the sheath circulating current. Compared with traditional cross-connection grounding, the proposed methods can reduce the coupling degree between loops, thus decreasing the induced voltage and circulating current. The different grounding methods of the sheath are modeled in the environment of an electromagnetic transient program (EMTP), and the sheath circulating current is simulated and compared with the conventional cross-connection grounding method. In the asymmetric arrangement, the proposed series connection method can reduce the sheath circulating current by at least 50%; however, its increases the sheath circulating current in the symmetric arrangement.

Comparison of Different Methods for Calculating Electrical Parameters of Power Cables

Real‐time Calculation of Three Core Cable Conductor Temperature Based on Thermal Circuit Model with Thermal Resistance Correction

Investigation on Circulation Current Calculation and Grounding Methods of Multi-circuit Cables

Investigation on Steady State Characteristics and Loss Reduction Measures of 220 Kv Power Cables

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Steady-state Electrical Properties and Loss Reduction Measures Analysis for 220 Kv Tunnel Cable System

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

A Power Flow Calculation Approach for Distribution Network of Pure Power Cables

Simulation Analysis of Cable Dome Construction Process

Additional Low Frequency Signal Measurement Method Of Insulation Resistance About Mine Cable

Numerical Calculation of Real-Time Ampacity of High Voltage Power Cable Duct Laying Based on Environmental Information

Coupled Thermal-Electrical Analysis of 110 Kv Corrugated Aluminum Sheathed and Smooth Aluminum Sheath Cables Based on Finite Element Simulation Method

An Investigation on Grounding System of AC Single-core Submarine Cable Based on Multi-conductor Analysis Theory

Comparison of long cable impedances using multiphysics and equivalent circuit models

Fast Computation of the Series Impedance of Power Cables with Inclusion of Skin and Proximity Effects

Simulation and Calculation of Temperature Field and Current-Carrying Capacity of Power Cables under Different Laying Methods

Calculation of Ampacity of Double-loop XLPE Cables in Trenches Based on Multiphysics Simulation

On Simplified 3D Finite Element Simulations of Three-core Armored Power Cables

Comparison of Methods for Suppressing Circulating Current in Metal Sheath of Cables Connected in Parallel

Simulation Analysis of Grounding Characteristics of Cable Based on ATP-EMTP

Cable Sheath Loss Reduction Strategy Research Based on the Coupled Line Model