Abstract:Here, we demonstrate a new type of 3-dB coupler that has an ultra-broadband operational range starting from 1300 nm to 1600 nm with low fabrication sensitivity. Overall device size is 800 micron including in/out S-bend waveguides. The coupler is an asymmetric non-uniform directional coupler that consists of two tapered waveguides. One of the coupler arms is shifted by 130 micron in the propagation direction, which reduces the phase mismatch between the odd and even mode of the coupled system resulting in a better wavelength-flattened response compared to a not shifted coupler. Moreover, compared to a long adiabatic coupler, we achieved a similar wavelength response at 16 times smaller device length. The couplers were fabricated using the silicon nitride platform of Lionix International. We also experimentally demonstrated an optical switch that is made by using two of these couplers in a Mach Zehnder interferometer configuration. According to experimental results, this optical switch exhibits -10 dB of extinction ratio over a 100 nm wavelength range (1500-1600 nm). Our results indicate that the asymmetric non-uniform directional coupler holds great promise for various applications including optical imaging, telecommunications, and reconfigurable photonic processors where compact, fabrication-tolerant and wavelength-insensitive couplers are essential.

Low-Loss Silicon Directional Coupler with Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides

Low-Loss Silicon Directional Coupler With Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Broadband and High Uniformity Y Junction Optical Beam Splitter with Multimode Tapered Branch

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Low-loss directional coupler for the C, L and U bands based on subwavelength gratings

Ultracompact And Wideband Power Splitter Based On Triple Photonic Crystal Waveguides Directional Coupler

Ultra-Compact Broadband 2 × 2 3 Db Power Splitter Using a Subwavelength-Grating-Assisted Asymmetric Directional Coupler

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

Compact, Broadband, and Low-Loss Silicon Photonic Arbitrary Ratio Power Splitter Using Adiabatic Taper.

An asymmetric non-uniform 3-dB directional coupler with 300-nm bandwidth

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint

Broadband Multimode 3 Db Optical Power Splitter Using Tapered Couplers.

Broadband and High-Performance Devices for the Silicon and Silicon-Nitride Platforms

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations