Abstract:There has been a growing interest in the development of efficient flexible organic solar cells (OSCs) due to their unique capacity to provide energy sources for flexible electronics. To this end, it is required to design a compatible interlayer with low processing temperature and high electronic quality. In this work, we present that the electronic quality of the ZnO interlayer fabricated from a low-temperature (130 °C) sol–gel method can be significantly improved by doping an organic small molecule, TPT-S. The doped TPT-S, on the one hand, passivates uncoordinated Zn-related defects by forming N–Zn bonds. On the other hand, photoinduced charge transfer from TPT-S to ZnO is confirmed, which further fills up electron-deficient trap states. This renders ZnO improved electron transport capability and reduced charge recombination. By illuminating devices with square light pulses of varying intensities, we also reveal that an unfavorable charge trapping/detrapping process observed in low-temperature-processed devices is significantly inhibited after TPT-S doping. OSCs based on PBDB-T-2F:IT-4F with ZnO:TPT-S being the cathode interlayer yield efficiencies of 12.62 and 11.33% on rigid and flexible substrates, respectively. These observations convey the practicality of such hybrid ZnO in high-performance flexible devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c23087?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c23087</a>.UV–vis absorption spectrum of pure and hybrid ZnO films; Tauc plots of ZnO, TPT-S, and TPT-doped ZnO films; AFM height images, FTIR spectra, and energy-level diagram of TPT-S and ZnO; device structure and chemical structure of the active layer; optimization of the TPT-S doping weight ratio; EQE spectra of three types of devices and corresponding EQE enhancement ratio; integrated current density; transmittance (T) spectra and total absorption (1 – R – T) spectra; J–V curves of electron-only devices; Jsc versus light intensity of three types of devices plotted in the log x–log y scale; extraction photocurrent transient in photo-CELIV experiments of three types of devices; and photovoltaic performance parameters of devices based on different TPT-S doping weight ratios (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c23087/suppl_file/am0c23087_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Suppressed Degradation Process of Green‐Solvent Based Organic Solar Cells Through ZnO Modification With Sulfhydryl Derivatives

Regulating pre-aggregation in non-halogenated solvent to enhance the efficiency of organic solar cells

One-Step Preparation of ZnO Electron Transport Layers Functionalized with Benzoic Acid Derivatives

Inner Side Chain Modification of Small Molecule Acceptors Enables Lower Energy Loss and High Efficiency of Organic Solar Cells Processed with Non‐halogenated Solvents

Strengthening The Hetero‐Molecular Interactions in Giant Dimeric Acceptors Enables Efficient Organic Solar Cells

Electronic and Photochemical Passivation by a Classic Sunscreen Material Leading to Reduced Voc Losses and Enhanced Stability in Organic Solar Cells

Sustainable Molecular Passivation Via Heat-Induced Disaggregation and Redox Reactions for Inverted Perovskite Solar Cells

Visible Light–Induced Degradation of Inverted Polymer:Nonfullerene Acceptor Solar Cells: Initiated by the Light Absorption of ZnO Layer

An Efficiency of 16.46% and a T 80 Lifetime of Over 4000 h for the PM6:Y6 Inverted Organic Solar Cells Enabled by Surface Acid Treatment of the Zinc Oxide Electron Transporting Layer

An Efficiency of 16.46% and a T80 Lifetime of over 4000 H for the PM6:Y6 Inverted Organic Solar Cells Enabled by Surface Acid Treatment of the Zinc Oxide Electron Transporting Layer.

Relationship between molecular properties and degradation mechanisms of organic solar cells based on bis-adducts of phenyl-C61 butyric acid methyl ester

Manipulation of Zinc Oxide with Zirconium Doping for Efficient Inverted Organic Solar Cells

Ethanedithiol Treatment of Solution‐Processed ZnO Thin Films: Controlling the Intragap States of Electron Transporting Interlayers for Efficient and Stable Inverted Organic Photovoltaics

Polymerized Small‐Molecule Acceptor as an Interface Modulator to Increase the Performance of All‐Small‐Molecule Solar Cells

Dual‐Use Self‐Assembled Monolayer Controlling Charge Carrier Extraction in Organic Solar Cells

Benzo[1,2- b :4,5- b ′]difuran Polymer-Based Non-Fullerene Organic Solar Cells: The Roles of Non-Fullerene Acceptors and Molybdenum Oxide on Their Ambient Stabilities and Processabilities

Mastering morphology of non-fullerene acceptors towards long-term stable organic solar cells

Overcoming Disordered Preaggregation in Liquid State for Highly Efficient Organic Solar Cells Printed from Nonhalogenated Solvents

Molecular Doping Inhibits Charge Trapping in Low-Temperature-Processed ZnO toward Flexible Organic Solar Cells

Healing the Degradable Organic–inorganic Heterointerface for Highly Efficient and Stable Organic Solar Cells

Designed Polar Cosolvent‐Prepared Zinc Oxide Film for Efficient and Stable Inverted Organic Solar Cells