Abstract:Mode-locked mid-infrared (mid-IR) fiber lasers are of increasing interest due to their many potential applications in spectroscopic sensors, infrared countermeasures, laser surgery, and high-efficiency pump sources for nonlinear wavelength convertors. Er3+-doped ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber lasers, which can emit mid-IR light at 2.65-2.9 mu m through the transition from the upper energy level I-4(11/2) to the lower laser level I-4(13/2), have attracted much attention because of their broad emission range, high optical efficiency, and the ready availability of diode pump lasers at the two absorption peaks of Er3+ ions (975 nm and 976 nm). In recent years, significant progress on high power Er3+-doped ZBLAN fiber lasers has been achieved and over 20 watt cw output at 2.8 mu m has been demonstrated; however, there has been little progress on ultrafast mid-IR ZBLAN fiber lasers to date. We report a passively mode-locked Er3+-doped ZBLAN fiber laser in which a Fe2+:ZnSe crystal was used as the intracavity saturable absorber. Fe2+:ZnSe is an ideal material for mid-IR laser pulse generation because of its large saturable absorption cross-section and small saturation energy along with the excellent opto-mechanical (damage threshold similar to 2 J/cm(2)) and physical characteristics of the crystalline ZnSe host. A 1.6 m double-clad 8 mol% Er3+-doped ZBLAN fiber was used in our experiment. The fiber core has a diameter of 15 mu m and a numerical aperture (NA) of 0.1. The inner circular cladding has a diameter of 125 mu m and an NA of 0.5. Both continuous-wave and Q-switched mode-locking pulses at 2.8 mu m were obtained. Continuous-wave mode locking operation with a pulse duration of 19 ps and an average power of 51 mW were achieved when a collimated beam traversed the Fe2+:ZnSe crystal. When the cavity was modified to provide a focused beam at the Fe2+:ZnSe crystal, Q-switched mode-locked operation with a pulse duration of 60 ps and an average power of 4.6 mW was achieved. More powerful and narrower pulses are expected if the dispersion of the cavity can be properly managed.

Mid-infrared chalcogenide glass Raman fiber laser

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

More Than 200 W Random Raman Fiber Laser with Ultra-Short Cavity Length Based on Phosphosilicate Fiber

5?μm CW Ce^3+-doped chalcogenide glass fiber laser with 17% slope efficiency

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Progress in rare-earth-doped mid-infrared fiber lasers

Numerical Modeling and Optimization of Mid-Infrared Fluoride Glass Raman Fiber Lasers Pumped by $\hbox{tm}^{3+}$ -Doped Fiber Laser

Precisely controllable fabrication of Er3+-doped glass ceramic fibers: novel mid-infrared fiber laser materials

Room temperature fiber laser at 3.92 μm

Mid-infrared emissions of Dy3+ doped Ga-As-S chalcogenide glasses and fibers and their potential for a 42 μm fiber laser

Numerical Modeling and Optimization of Mid-Infrared Fluoride Glass Raman Fiber Lasers Pumped by <formula formulatype="inline"><tex Notation="TeX">$\hbox{Tm}^{3+}$</tex></formula>-Doped Fiber Laser

Mid-infrared Supercontinuum Generation in Chalcogenide Fibers with High Laser Damage Threshold.

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

Mid-infrared emissions of Dy 3+ doped Ga-As-S chalcogenide glasses and fibers and their potential for a 4.2 μm fiber laser

Broadband Near-Infrared Amplified Spontaneous Emission of Er3+-doped Germanate Glass Fiber.

Direct femtosecond laser writing fiber Bragg gratings in double-D cladding chalcogenide glass infrared fibers

Single-frequency fiber laser at 1627 nm based on a self-designed Er-doped hybridized glass fiber

Picosecond Passively Mode-Locked Mid-Infrared Fiber Laser

4.8-μm CO-filled hollow-core silica fiber light source

High-power Diode-Pumped Fiber Laser Operating at 3 Μm

Efficient 2075-nm laser emission from Ho3+-doped fluorotellurite glass in a compact all-fiber structure