Abstract:An integrated plasma profile control strategy, ARTAEMIS, is being developed for extrapolating present-day advanced tokamak (AT) scenarios to steady-state operation. The approach is based on semi-empirical modelling and was initially explored on JET (Moreau et al 2008 Nucl. Fusion 48 106001). This paper deals with the general applicability of this strategy for simultaneous magnetic and kinetic control on various tokamaks. The determination of the device-specific, control-oriented models that are needed to compute optimal controller matrices for a given operation scenario is discussed. The methodology is generic and can be applied to any device, with different sets of heating and current drive actuators, controlled variables and profiles. The system identification algorithms take advantage of the large ratio between the magnetic and thermal diffusion time scales and have been recently applied to both JT-60U and DIII-D data. On JT-60U, an existing series of high bootstrap current (∼70%), 0.9 MA non-inductive AT discharges was used. The actuators consisted of four groups of neutral beam injectors aimed at perpendicular injection (on-axis and off-axis), and co-current tangential injection (also on-axis and off-axis). On DIII-D, dedicated system identification experiments were carried out in the loop voltage (V ext) control mode (as opposed to current control) to avoid feedback in the response data from the primary circuit. The reference plasma state was that of a 0.9 MA AT scenario which had been optimized to combine non-inductive current fractions near unity with 3.5 < βN < 3.9, bootstrap current fractions larger than 65% and H 98(y,2) = 1.5. Actuators other than V ext were co-current, counter-current and balanced neutral beam injection, and electron cyclotron current drive. Power and loop voltage modulations resulted in dynamic variations of the plasma current between 0.7 and 1.2 MA. It is concluded that the response of essential plasma parameter profiles to specific actuators of a given device can be satisfactorily identified from a small set of experiments. This provides, for control purposes, a readily available alternative to first-principles plasma modelling.

Loss of intestinal GATA4 prevents diet-induced obesity and promotes insulin sensitivity in mice.

Surface temperature measurement from infrared synthetic diagnostic in preparation for ITER operations

Plasma Models for Real-Time Control of Advanced Tokamak Scenarios

Model Optimization of Infrared Homogenization for Inertial Confinement Fusion Cryotargets

Infra-red thermographic inversion in ST40

Multi-physics modeling of the long-term evolution of helium plasma exposed surfaces

Fundamental study of a water jet injected into a vacuum vessel of fusion reactor under the ingress of coolant event

JET Far Infrared (FIR) interferometer/polarimeter diagnostic system – 40 years of lessons-learned

Modelling of plasma facing component erosion, impurity migration, dust transport and melting processes at JET-ILW

First principles and integrated modelling achievements towards trustful fusion power predictions for JET and ITER

In situ multi-band apparent emissivity measurements of aerospace materials in inductively coupled plasma flows

Infrared thermography with non-uniform heat flux boundary conditions on the rotor endwall of an axial turbine

Options for Implementation of IR Thermography Diagnostics in a Tokamak with Reactor Technologies TRT

A framework for the assessment and control of ITER main chamber heat loads

Detecting Neoclassical Tearing Modes in high-temperature ITER plasma scenarios with the ITER prototype Electron Cyclotron Emission Diagnostic

South African health-budget cuts hit premature newborns

Application of Infrared Thermography in NDT of Plasma-Facing Components for Tokamaks

Mid-infrared spectroscopic thermotransmittance measurements in dielectric materials for thermal imaging

Thermalization of Mesh Reinforced Ultra-Thin Al-Coated Plastic Films: A Parametric Study Applied to the Athena X-IFU Instrument

Line-of-sight gas radiation effects on near-infrared two-color ratio pyrometry measurements during plasma wind tunnel experiments