Abstract:The SPARC tokamak will have scrape-off layer parallel heat fluxes on the order of GW/m2. Managing power exhaust of this magnitude will be mandatory for a reactor-scale device. To enable this mission, a thermal diagnostic suite will be deployed to measure the in-vessel structural temperatures to ensure they do not exceed their design limits and to determine the spatial distribution and magnitude of energy deposited onto the first wall. Thermocouples and fiber Bragg gratings have been selected for their environmental compatibility and proven useful on other fusion devices. High-density thermocouple arrays in the divertor will have two spring-loaded thermocouples per divertor target tile, which are being used as calorimeters, and will look to resolve the temperature distribution within the tile due to a swept or static strike point. All systems will need to survive the vacuum vessel bake, set at a minimum plasma facing surface temperature of 350 °C, which presents a particularly challenging environment for the fiber-based subsystem. Along with this temperature design requirement, all the materials in the primary vacuum need to be ultra-high vacuum compatible, able to handle the expected neutron and gamma radiation, as well as tritium exposure, all of which restrict material options. Finally, due to the expected activated environment in SPARC, there will be little chance to replace defective sensors, so system resilience is ensured through toroidal redundancy, probe material selection, and mitigating the impact of common-mode failures. Initial testing of sensors show that intershot structural measurements are sufficiently captured with the raw output, but intrashot measurements of the plasma facing material requires model-based interpretive tools.

Options for Implementation of IR Thermography Diagnostics in a Tokamak with Reactor Technologies TRT

Conceptual Project for Diagnostics of Erosion of the First Wall and Divertor of the Tokamak with Reactor Technologies TRT

Microwave Diagnostics System in the HL-2A Tokamak

Set of Thomson Scattering Diagnostics for TRT

The Concept of the MSE Diagnostic at the TRT Tokamak Facility

Concept of a Diagnostic System for Measuring the Electron Temperature Profile of Plasma from the Intensity of Electron Cyclotron Emission for the TRT Facility

Development of a thermal diagnostic system for the SPARC tokamak

Infra-red thermographic inversion in ST40

Concept of the Doppler Backscattering Diagnostic on TRT

Plasma Diagnostics in T-15MD Divertor: Tasks, Problems, and Implementation Possibilities

A thorough experimental assessment of THz-TDS plasma diagnostic techniques for nuclear fusion applications

Surface temperature measurement from infrared synthetic diagnostic in preparation for ITER operations

ITER and TRT—Technological Platforms for Controlled Thermonuclear Fusion

Possibilities of Using Active Neutral Particle Diagnostics at the TRT Facility

Thomson scattering diagnostics at the Globus M2 tokamak

Application of Infrared Thermography in NDT of Plasma-Facing Components for Tokamaks

Modeling of the ITER-like wide-angle infrared thermography view of JET

Detection of Internal Transport Barrier in the T-10 Tokamak Using Thomson Scattering Diagnostics

Analysis of sample temperature dynamics under pulsed laser irradiation during laser-induced-desorption diagnostic

RF discharge for in situ mirror surface recovery in ITER