Abstract:Electrospray thrusters are a promising electric micropropulsion technology which could be used to meet the propulsion needs of nanosatellites, or for fine attitude control of larger spacecraft. Multimodal propulsion is the integration of two or more propulsion modes into a system which utilizes a common propellant. Indeed, spacecraft mission simulations and models have shown that this type of multimode propulsion capacity is exciting because of the flexibility and adaptability it provides mission designers and planners. A single spacecraft would have potential to execute drastically different mission profiles, and the exact mission could even be determined post-launch. The current paper investigates a micro-propulsion system which combines a droplet and ion mode electrospray emitter into a unified multimodal system (using an ionic liquid as the common propellant for both systems). The high relative thrust droplet mode emitter was fabricated from P3 borosilicate glass while the high efficiency ion mode emitter, Carbon Xerogel dense porous substrate, was fabricated in-house. To characterize the multimodal thruster, a full beam and time-of-flight (ToF) experimental setup were developed at the RMC Advanced Propulsion and Plasma Exploration Laboratory (RAPPEL) and experiments were conducted using a custom vacuum chamber. The ion mode emitter, with a beam comprised purely of ions had an onset voltage around 1400 V with an estimated thrust performance of 0.14 and specific impulse of 4040 s. For droplet mode, with a mixed beam comprised of around 17 droplets and 83 ions, an onset voltage of 1375 V with an estimated performance of thrust at 14 and specific impulse of 140 s were measured. The prototype thruster demonstrates how various electrospray emitters could be combined into a multimodal system to provide flexibility and adaptability in providing effective thrust for small satellites.

CFD-Driven Optimization of Dual-Throat Micro-Nozzle for Enhanced Thrust in Cold Gas Propulsion for Microsatellites

Design, Development, and Performance of an Ammonia Self-Managed Vaporization Propulsion System for Micro-Nano Satellites.

Kinetic Simulation of Nozzle Flow in a Micronewton-Class Cold Gas Thruster

Design and simulation of a micro thrust solenoid valve nozzle based on CFD&DOE optimization analysis

A Dual Mode Propulsion System for Small Satellite Applications

Direct Simulation Monte Carlo Analysis on Thrust Vectoring of a Supersonic Micro Nozzle using Bypass Mass Injection

Bimodal Propulsion System for Small Spacecraft: Design, Fabrication, and Performance Characterization

Computational investigation of both geometric and fluidic compressible turbulent thrust vectoring, using a Coanda based nozzle

Development and Qualification of Green Propellant Micropump for MicroSat and CubeSat Propulsion Systems

NUMERICAL INVESTIGATION OF THE THRUST VECTORING PERFORMANCE OF A BYPASS DUAL THROAT NOZZLE

Optimization, Test and Diagnostics of Miniaturized Hall Thrusters

Multimodal electrospray thruster for small spacecraft: design and experimental characterization

Development of Electric and Chemical Microthrusters

Aerodynamic Optimization of Turbine Based Combined Cycle Nozzle

Lab-on-PCB solid propellant microthruster with multi-mode thrust capabilities

Green micro-resistojet research at Delft University of Technology: new options for Cubesat propulsion

Direct Simulation Monte Carlo Simulation of the Effect of Needle Valve Structures on the Rarefied Flow of Cold Gas Thrusters

Aerodynamic Design Optimization of a Variable Geometry Nozzle Vane For Automotive Turbochargers

The Optimization Design of Large-Camber Nozzle Based on Geometric Optimization

Design of the Propulsion System of Nano satellite: StudSat2