Abstract:Nb3Sn conductors are important candidates for high-field magnets for particle accelerators, and they continue to be widely used for many laboratory and NMR magnets. However, the critical current density, Jc, of present Nb3Sn conductors declines swiftly above 12-15T. State-of-the-art Ta- and Ti-doped strands exhibit upper critical field, Hc2, values of 24-26.5T (4.2K) and do not reach the FCC target Jc, which serves as the present stretch target for Nb3Sn development. As recently demonstrated, to meet this goal requires enhanced vortex pinning but an independent and supplementary approach is to significantly enhance Hc2. In this study, we have arc-melted multiple Nb alloys with added Hf, Zr, Ta and Ti and drawn them successfully into monofilament wires to investigate the possibilities of Hc2 enhancement through alloying. Hc2(T) was measured for all samples in fields up to 16T and some up to 31T. We have found that all alloys show good agreement with the standard Werthamer, Helfand, and Hohenberg (WHH) fitting procedure without the need to adjust the paramagnetic limitation parameter (alpha) and spin-orbit scattering parameter (lambda_so). The evaluation of dHc2/dT near Tc, which is proportional to the electronic specific heat coefficient (gamma) and the normal state resistivity (rho_n), allows a better understanding of the induced disorder introduced by alloying in the A15 phase. So far, we have observed that Hf alloying of pure Nb can enhance Hc2(0) by 3-4T to 28T, while adding just 1 at. %Hf or Zr into a Nb4Ta base alloy can raise Hc2(0) to 31T. Very importantly we find that Hf and Zr raise the alloy recrystallization temperature above the usual A15 reaction temperature range of 650°C-750°C, thus ensuring denser A15 phase nucleation in the Nb alloy grain boundaries, possibly leading to a more homogeneous A15 phase Sn content and refined A15 grain size. The potential for...

A New Ductile, Tougher Resin for Impregnation of Superconducting Magnets

A new ductile, tougher resin for impregnation of superconducting magnets

Fracture Toughness, Radiation Hardness, and Processibility of Polymers for Superconducting Magnets

Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb 3 Sn Demonstrator under High Magnetic Field

Training-free demonstration of a 5.4 T Nb 3 Sn canted-cosine-theta accelerator dipole impregnated with paraffin wax

Training performance of Nb3Sn Rutherford cables in a channel with a wide range of impregnation materials

Minimum Quench Energy Of Nb$_3$Sn Wires With High Specific Heat Tape

Fabrication of Nbti Superconducting Joint by Electromagnetic Forming Method

Development Of Nb3sn Superconducting Coil Manufacture Technology

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Doping control of magnetism and emergent electromagnetic induction in high-temperature helimagnets

Characterization Of Nb3sn Strands For A 40-T Hybrid Magnetic Model Coil

Fabrication Procedures and Mechanical Supports of No-Insulation All-GdBCO Double Pancake Magnets in Liquid Helium

A Combined Testing and Modelling Methodology for the Mechanics of High-Field Superconducting Magnets

A Study of the Heat Transfer Properties of CIP Doped Magnetorheological Elastomers

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Influence of Nb Alloying on Nb Recrystallization and the Upper Critical Field of Nb3Sn

Recent Test Results of the High Field <formula formulatype="inline"> <tex Notation="TeX">${\rm Nb}_{3}{\rm Sn}$</tex></formula> Dipole Magnet HD2

A novel method combining additive manufacturing and alloy infiltration for NdFeB bonded magnet fabrication

Impact of local plastic deformation on thermo-magnetic instability of high-J c Nb 3 Sn strand

Characterization of $\hbox{Nb}_{3}\hbox{Sn}$ Strands for a 40-T Hybrid Magnetic Model Coil