Abstract:Bismuth telluride-based alloys are the best performing thermoelectric materials near room temperature. Grain size refinement and nanostructuring are the core stratagems for improving thermoelectric and mechanical properties. However, the donor-like effect induced by grain size refinement strongly restricts the thermoelectric properties especially in the vicinity of room temperature. In this study, the formation mechanism for the donor-like effect in Bi2Te3-based compounds was revealed by synthesizing five batches of polycrystalline samples. We demonstrate that the donor-like effect in Bi2Te3-based compounds is strongly related to the vacancy defects (VBi‴ and VTe···) induced by the fracturing process and oxygen in air for the first time. The oxygen-induced donor-like effect dramatically increases the carrier concentration from 2.5 × 1019 cm-3 for the zone melting ingot and bulks sintered with powders ground under an inert atmosphere to 7.5 × 1019 cm-3, which is largely beyond the optimum carrier concentration and seriously deteriorates the thermoelectric performance. Moreover, it is found that both avoiding exposure to air and eliminating the thermal vacancy defects (VBi‴ and VTe···) via heat treatment before exposure to air can effectively remove the donor-like effect, producing almost the same carrier concentration and Seebeck coefficient as those of the zone melting ingot for these samples. Therefore, a defect equation of oxygen-induced donor-like effect was proposed and was further explicitly corroborated by positron annihilation measurement. With the removal of donor-like effect and improved texturing via multiple hot deformation (HD) processes, a maximum power factor of 3.5 mW m-1 K-2 and a reproducible maximum ZT value of 1.01 near room temperature are achieved. This newly proposed defect equation of the oxygen-induced donor-like effect will provide a guideline for developing higher-performance V2VI3 polycrystalline materials for near-room-temperature applications.

Modulating thermoelectric properties in oxygen-passivated Sb2Te3 thin film through grain boundary engineering

Atomic-scale Tuning of Oxygen-Doped Bi2Te2.7Se0.3 to Simultaneously Enhance the Seebeck Coefficient and Electrical Conductivity.

Synergistic modulation of mobility and thermal conductivity in (Bi,Sb)2Te3 towards high thermoelectric performance

Microstructures and Thermoelectric Properties of GeSbTe Based Layered Compounds

Tuning thermoelectric properties of Sb$_2$Te$_3$-AgSbTe$_2$ nanocomposite thin film -- synergy of band engineering and heat transport modulation

Thermoelectric properties and microstructure of nanocomposite Sb-GeO2 and Sb–TiO2 thin films

Modulation of Charge Transport at Grain Boundaries in SrTiO3: Toward a High Thermoelectric Power Factor at Room Temperature

Significantly improved thermoelectric performance of Ag-doped Bi0.5Sb1.5Te3 films deriving from high-efficient carrier filtering effect

Enhancing thermoelectric properties of AgSbTe2 thin films by modulating vacancies and microstructures

Enhancing thermoelectric properties of AgSbTe 2 thin films by modulating vacancies and microstructures

Effective Atomic Interface Engineering in Bi2Te2.7Se0.3 Thermoelectric Material by Atomic-Layer-deposition Approach

Nanostructuring and band engineering boosting thermoelectric performance of Bi-Sb-Te alloys via CsBr doping

Improvement of Thermoelectric Performance of Bi(2)Te(2.7)Se(0.3)via Grain Boundary Engineering with Melting KOH

Enhancing thermoelectric performance of Sb2Te3 through swapped bilayer defects

Dramatic Enhancement of Thermoelectric Performance in PbTe by Unconventional Grain Shrinking in Sintering Process

Enhancement on thermoelectric performance by Ti doping and vacancies

Removing the Oxygen-Induced Donor-like Effect for High Thermoelectric Performance in n-Type Bi 2 Te 3 -Based Compounds

Synergistical Enhancement of Thermoelectric Properties in N‐type Bi2O2Se by Carrier Engineering and Hierarchical Microstructure

Effect of Doping and Annealing on Thermoelectric Properties of Bismuth Telluride Thin Films

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Graphene-assisted synergistic electronic DOS modulation and phonon scattering to improve the thermoelectric performance of Mg3Sb2-based materials