Abstract:The p-type Sb2Te3 alloy, a binary compound belonging to the V2VI3-based materials, has been widely used as a commercial material in the room-temperature zone. However, its low thermoelectric performance hinders its application in the low-medium temperature range. In this study, we prepared Sb2Te3 nanosheets coated with nanometer-sized Pt particles using a combination of solvothermal and photo-reduction methods. Our findings demonstrate that despite the adverse effects on certain properties, the addition of Pt particles to Sb2Te3 significantly improves the thermoelectric properties, primarily due to the enhanced electronic conductivity. The optimal ZT value reached 1.67 at 573 K for Sb2Te3 coated with 0.2 wt% Pt particles, and it remained above 1.0 within the temperature range of 333–573 K. These values represent a 47% and 49% increase, respectively, compared to the pure Sb2Te3 matrix. This enhancement in thermoelectric performance can be attributed to the presence of Pt metal particles, which effectively enhance carrier and phonon transport properties. Additionally, we conducted a Density Functional Theory (DFT) study to gain further insights into the underlying mechanisms. The results revealed that Sb2Te3 doped with Pt exhibited a doping level in the band structure, and a sharp rise in the Density of States (DOS) was observed. This sharp rise can be attributed to the presence of Pt atoms, which lead to enhanced electronic conductivity. In conclusion, our findings demonstrate that the incorporation of nanometer-sized Pt particles effectively improves the carrier and phonon transport properties of the Sb2Te3 alloy. This makes it a promising candidate for medium-temperature thermoelectric applications, as evidenced by the significant enhancement in thermoelectric performance achieved in this study.

Nanostructuring and band engineering boosting thermoelectric performance of Bi-Sb-Te alloys via CsBr doping

Enhanced Density-of-States Effective Mass and Strained Endotaxial Nanostructures in Sb-Doped Pb0.97Cd0.03Te Thermoelectric Alloys

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles

Realizing High Thermoelectric Performance in Bi 0.4 Sb 1.6 Te 3 Nanosheets by Doping Sn Element

Achieving High Thermoelectric Performance in p-Type BST/PbSe Nanocomposites through the Scattering Engineering Strategy

Suppressing Bipolar Effect to Broadening the Optimum Range of Thermoelectric Performance for p-type Bismuth Telluride-Based Alloys via Calcium Doping

Highly Enhanced Thermoelectric and Mechanical Properties of Bi-Sb-Te Compounds by Carrier Modulation and Microstructure Adjustment

Simultaneous Enhancement of the Thermoelectric and Mechanical Performance in One-Step Sintered n-Type Bi2Te3-Based Alloys via a Facile MgB2 Doping Strategy

Broadening temperature plateau of high zTs in PbTe doped Bi0·3Sb1·7Te3 through defect carrier regulation and multi-scale phonon scattering

Critical Role of Tellurium Self-Compensation in Enhancing the Thermoelectric Performance of P-Type Bi0.4Sb1.6Te3 Alloy

Simultaneously Improved Thermoelectric and Mechanical Properties Driven by MgB2 Doping in Bi0.4Sb1.6Te3 Based Alloys

Vacancy Manipulation by Ordered Mesoporous Induced Optimal Carrier Concentration and Low Lattice Thermal Conductivity in BixSb2- xTe3 Yielding Superior Thermoelectric Performance

Enhancing Thermoelectric Performance in P-Type Sb2Te3-Based Compounds Through Nb─Ag Co-Doping with Donor-Like Effect.

Enhancing the thermoelectric performance of GeTe through Sb doping and nanocompositing with SiC for reduced thermal conductivity

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Boron-Mediated Grain Boundary Engineering Enables Simultaneous Improvement of Thermoelectric and Mechanical Properties in N-Type Bi<sub>2</sub>Te<sub>3</sub>

Improved Thermoelectric Performance of Sb2Te3 Nanosheets by Coating Pt Particles in Wide Medium-Temperature Zone

Organic/Inorganic Hybrid Design as a Route for Promoting the Bi<sub>0.5</sub>Sb<sub>1.5</sub>Te<sub>3</sub> for High-Performance Thermoelectric Power Generation

High Performance Thermoelectric Power of Bi 0.5 Sb 1.5 Te 3 Through Synergistic Cu 2 GeSe 3 and Se Incorporations

Enhanced thermoelectric performance of p-type sintered BiSbTe-based composites with AgSbTe2 addition