Abstract:Background The potential reduction of normal tissue toxicities during FLASH radiotherapy (FLASH‐RT) has inspired many efforts to investigate its underlying mechanism and to translate it into the clinic. Such investigations require experimental platforms of FLASH‐RT capabilities. Purpose To commission and characterize a 250 MeV proton research beamline with a saturated nozzle monitor ionization chamber for proton FLASH‐RT small animal experiments. Methods A 2D strip ionization chamber array (SICA) with high spatiotemporal resolution was used to measure spot dwell times under various beam currents and to quantify dose rates for various field sizes. An Advanced Markus chamber and a Faraday cup were irradiated with spot‐scanned uniform fields and nozzle currents from 50 nA to 215 nA to investigate dose scaling relations. The SICA detector was set up upstream to establish a correlation between SICA signal and delivered dose at isocenter to serve as an in vivo dosimeter and monitor the delivered dose rate. Two off‐the‐shelf brass blocks were used as apertures to shape the dose laterally. Dose profiles in 2D were measured with an amorphous silicon detector array at a low current of 2 nA and validated with Gafchromic films EBT‐XD at high currents of up to 215 nA. Results Spot dwell times become asymptotically constant as a function of the requested beam current at the nozzle of greater than 30 nA due to the saturation of monitor ionization chamber (MIC). With a saturated nozzle MIC, the delivered dose is always greater than the planned dose, but the desired dose can be achieved by scaling the MU of the field. The delivered doses exhibit excellent linearity with R2>0.99 with respect to MU, beam current, and the product of MU and beam current. If the total number of spots is less than 100 at a nozzle current of 215 nA, a field‐averaged dose rate greater than 40 Gy/s can be achieved. The SICA‐based in vivo dosimetry system achieved excellent estimates of the delivered dose with an average (maximum) deviation of 0.02 Gy (0.05 Gy) over a range of delivered doses from 3 Gy to 44 Gy. Using brass aperture blocks reduced the 80%‐20% penumbra by 64% from 7.55 mm to 2.75 mm. The 2D dose profiles measured by the Phoenix detector at 2 nA and the EBT‐XD film at 215 nA showed great agreement, with a gamma passing rate of 95.99% using 1mm/2% criterion. Conclusions A 250 MeV proton research beamline was successfully commissioned and characterized. Challenges due to the saturated monitor ionization chamber were mitigated by scaling MU and using an in vivo dosimetry system. A simple aperture system was designed and validated to provide sharp dose fall‐off for small animal experiments. This experience can serve as a foundation for other centers interested in implementing FLASH radiotherapy preclinical research, especially those equipped with a similar saturated MIC. This article is protected by copyright. All rights reserved

Design of the offline test electronics for the nozzle system of proton therapy

Design of the offline test electronics for the nozzle system of proton therapy

Prototype Design of Readout Electronics for In-Beam TOF-PET of Heavy-Ion Cancer Therapy Device

A Design Implementation of the Central Process Module for an In-Beam PET in HICTD

A Dual-head Prompt Gamma Imaging System for Online Monitoring in Proton Therapy

Physical design of a single-amplifier-driven proton linac injector for a synchrotron-based proton-therapy system in China

A beam phase and energy measurement system based on direct RF signal IQ under-sampling technology

Design and Development of an ACCT for the Shanghai Advanced Proton Therapy Facility

Repurposing DailyQA3 for an efficient and spot position sensitive daily quality assurance tool for proton therapy

The Design and Initial Testing of the Beam Phase and Energy Measurement System for DTL in the Proton Accelerator of CSNS

Beam Position and Phase Measurement System for the Proton Accelerator in ADS

Development of multichannel readout electronics system for MWPC of heavy ion radiotherapy

A Beam Phase and Energy Measurement Instrument Based on Direct RF Signal IQ Undersampling Technique

Development and Performance Evaluation of a Prompt Gamma Imaging System for Real-time Proton Therapy Monitoring

Beam dynamic design of a high intensity injector for proton linac

THE CONTROL SYSTEM DEDICATED FOR BEAM LINE OF PROTON RADIOGRAPHY TEST-STAND ON A 100 MeV CYCLOTRON CYCIAE-100 *

Design and beam dynamics simulation of an 8 MeV compact accelerator-driven neutron source

Commissioning a 250 MeV research beamline for proton FLASH radiotherapy preclinical experiments

An integrated system for measuring 3D dose distributions of carbon-ion pencil beams in regular QA practice

Design of a Compact Beam Transport System for Laser-Driven Proton Therapy

Design, fabrication, and cold test of an S-band high-gradient accelerating structure for compact proton therapy facility