Abstract:The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

Development of 3-cell Traveling Wave SRF Cavity

Three-cell traveling wave superconducting test structure

Coaxial multi-mode cavities for fundamental SRF research in an unprecedented parameter space

Superconducting RF cavity R&D for future accelerators

Optimization of a traveling wave superconducting radiofrequency cavity for upgrading the International Linear Collider

Prototype design of a digital Low-Level RF system for S3FEL S-band Transverse Deflecting Cavities

Studies of the superconducting traveling wave cavity for high gradient LINAC

A Three-Cell Superconducting Deflecting Cavity Design for the ALS at LBNL

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Development of a cryocooler conduction-cooled 650 MHz SRF cavity operating at ~10 MV/m cw accelerating gradient

Development and cold-test of an RFQ-DTL coupled cavity

Development and Measurements of A Technological Cavity for 350mhz High Current Proton Rfq

Cryogenic rf test of the first plasma etched SRF cavity

Stable CW Operation of Nb$_3$Sn SRF Cavity at 10 MV/m using Conduction Cooling

SRF Cavity Emulator for PIP-II LLRF Lab and Field Testing

High precision rf control for srf cavities in lcls-ii

RF Design of 650-Mhz 2-Cell Cavity for CEPC

Design and Cold Measurements of a Coupled RFQ-SFRFQ Cavity

A 3-Cell Deflecting Rf Cavity for Emittance Exchange Experiment at ANL.

Design and Simulation of 500 MHz Single Cell Superconducting RF Cavity for SILF

Control algorithm tests using a virtual CW SRF cavity