Abstract:The European Spallation Source (ESS) accelerator is composed of superconducting elliptical cavities. When the facility is running, the cavities are fed with electrical field from klystrons. Parameters of this field are monitored and controlled by the Low-Level Radio Frequency (LLRF) system. Its main goal is to keep the amplitude and phase at a given set-point. The LLRF system is also responsible for the reference clock distribution. During machine operation the cavities are periodically experiencing strain caused by the Lorentz force, appearing when the beam is passing through the accelerating structures. Even small changes of the physical dimensions of the cavity cause a shift of its resonance frequency. This phenomenon, called detuning, causes significant power losses. It is actively compensated by the LLRF control system, which can physically tune lengths of the accelerating cavities with stepper motors (slow, coarse grained control) and piezoelements (active compensation during operation state). The paper describes implementation and tests of the software supporting various aspects of the LLRF system and cavities management. The Piezo Driver management and monitoring tool is dedicated for piezo controller device. The LO Distribution application is responsible for configuration of the local oscillator. The Cavity Simulator tool was designed to provide access to properties of the hardware device, emulating behaviour of elliptical cavities. IPMI Manager software was implemented to monitor state of MicroTCA.4 crates, which are major part of the LLRF system architecture. All applications have been created using the Experimental Physics and Industrial Control System (EPICS) framework and built in ESS EPICS Environment (E3).

Control algorithm tests using a virtual CW SRF cavity

Closed Loop Testing of Microphonics Algorithms Using a Cavity Emulator

Simulation of microphonic effects in high $Q_L$ TESLA cavities during CW operations

Coaxial multi-mode cavities for fundamental SRF research in an unprecedented parameter space

High precision rf control for srf cavities in lcls-ii

Digital LLRF control system design and implementation for APT superconducting cavities

Algorithms and Implementations of APT Resonant Control System

A novel method for Lorentz force detuning compensation in multi-cell superconducting RF cavity and its validation at room temperature

Simulated Lorentz Force Detuning Compensation With A Double Lever Tuner On A Dressed ILC/1.3 GHZ Cavity At Room Temperature

Prototype design of a digital Low-Level RF system for S3FEL S-band Transverse Deflecting Cavities

SRF Cavity Emulator for PIP-II LLRF Lab and Field Testing

PI Loop Resonance Control for Dark Photon Experiment at 2 K Using a 2.6 GHz SRF Cavity

Design and primary test of full scale cavity of cyciae-100

Frequency Control and Pre-Tuning of A Large Aperture 500 Mhz 5-Cell Superconducting Rf Cavity

Narrow bandwidth active noise control for microphonics rejection in superconducting cavities at LCLS-II

Design and Simulation of 500 MHz Single Cell Superconducting RF Cavity for SILF

Cavity Simulator for European Spallation Source

High-Level Software Tools for LLRF System Dedicated to Elliptical Cavities Management of European Spallation Source Facility

Simulation of adaptive feedforward control for magnetic alloy cavity

High-Q operation of SRF cavities: The potential impact of thermocurrents on the RF surface resistance

Dual-mode rf cavity: design, tuning and performance