Abstract:Using the methods of transmission and scanning electron microscopy, the microstructure of a V–W–Cr–Zr alloy is studied as a function of its plastic deformation value under the condition of high-pressure torsion in the Bridgman anvils. The main stages of structure transformation and the respective mechanisms are identified. It is found out that the grain and defect structure transformation up to e ≈ 1.1 is provided by the dislocation and dislocation-disclination mechanisms, which when combined activate the processes of submicrocrystalline structure formation. The deformation impact in the strain interval from e ≈ 1.1 to e ≈ 3 is characterized by a significant increase in the grain-boundary length. A high strength state is achieved in the course of this deformation, where the dislocation modes of plastic deformation are suppressed. This is accompanied by the activated processes of formation of two-level nanostructured states, wherein the principal mechanism is a quasi-viscous re-orientation by the flows of non-equilibrium point defects. A further increase in the deformation to e ≈ 5.3 gives rise to refinement of the submicrocrystalline grains and formation of two-level nanostructured states in the entire material volume. The main contribution to the grain- and subgrain transformations comes from the disclination and quasi-viscous modes of plastic deformation. At higher strain degrees (e > 5.3), the size of submicrocrystalline grains does not virtually change, and the transformation of two-level nanostructured states makes itself evident in the rotations of some of the fragments of this structure with respect to the other by small angles from tens of fractions of a degree to several degrees. The formation of the submicrocrystalline state is followed by a multiple increase in the microhardness; its values are observed to saturate at e ≈ 3.3.

In-situ study of rules of nanostructure evolution, severe plastic deformations, and friction under high pressure

Rules of plastic strain-induced phase transformations and nanostructure evolution under high-pressure and severe plastic flow

Theoretical Insight of Strengthening and Hardening Behavior in Ultrafine-Grained Metals under High Pressure

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

In situ quantitative study of plastic strain-induced phase transformations under high pressure: Example for ultra-pure Zr

Quantitative kinetic rules for plastic strain-induced $α$-$ω$ phase transformation in Zr under high pressure

Effect of initial microstructure on its evolution and $α\rightarrow ω$ phase transition in Zr under hydrostatic loading

Deformation Behavior Across the Zircon-Scheelite Phase Transition.

High Pressure Phase-Transformation Induced Texture Evolution and Strengthening in Zirconium Metal: Experiment and Modeling

Constitutive Law and Flow Mechanism in Diamond Deformation

Evolution of in-plane strain fields onset of a plastically deforming crack in zirconium

Origin of Plasticity in Nanostructured Silicon

Microstrain and grain-size analysis from diffraction peak width and graphical derivation of high-pressure thermomechanics

Plastic deformation in nanocrystalline TiN at ultra-low stress: An in situ nanoindentation study

Synchrotron x-ray total scattering and modeling study of high-pressure-induced inhomogeneous atom reconfiguration in an equiatomic Zr 50 Cu 50 metallic glassy alloy

Thermomechanics of nanocrystalline nickel under high pressure-temperature conditions.

Microstructure and Microhardness of V–W–Cr–Zr Alloy Depending on Deformation in Bridgman Anvils

Enhancing Fracture Toughness of Fine-Grained Zr Via Forming Nanoscale Defect Structures

A methodology for determining mechanical properties of nanomaterials at high pressure and temperature

An In Situ Study of the Role of Pressure on Fe Recrystallization and Grain Growth during Thermomechanical Processing

Dislocation-mediated brittle-ductile transition of diamond under high pressure