Abstract:Titanium alloy was extensively used in aerospace industrial field. It has a great significance to directly reveal the deformation process as a function of application conditions. This work investigates the real-time deformation behavior of laser direct metal deposited (LDMD) Ti-6Al-4V alloy at 200 degrees C, using self-developed high temperature in situ scanning electron microscope (SEM) tensile stage with a controlled heating system. The results showed that the microstructure of the sample comprised of columnar beta grains with zigzag grain boundaries decorated by tilted alpha plates along the building direction. During uniaxial tensile, slip bands develop along the grain boundaries between alpha plates with increasing stress. Grain boundary sliding contributes to the high tensile elongation. Compared the mechanical properties along transvers tensile with those at room temperature, the tensile stress decreased and displacement increased at 200 degrees C. Therefore, higher elongation and reduction in cross-sectional area were identified at 200 degrees C than those at room temperature. The fracture of specimen at 200 degrees C shows obvious necking character and deep dimples with thin rims. Coalescence of slip bands at alpha/alpha interface creates voids and the coupling of voids nucleates micro-crack. alpha/alpha grain boundary interface constitutes path to the crack propagation. The high misorientation angle at columnar beta grain boundary hinders the cracks propagation. Finally, the cracks accumulate along the columnar beta grain boundary leading to fracture. (C) 2019 Elsevier B.V. All rights reserved.

Balance of strength and ductility for laser directed energy deposited Ta-containing Ti6Al4V via solution and aging treatment

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Microstructure and Mechanical Properties of An Ultrahigh-strength Titanium alloy Ti-4.5Al-5Mo-5V-6Cr-1Nb Prepared Using Laser Directed Energy Deposition and Forging: A Comparative Study

Simultaneous improvement of strength and ductility of laser additively produced Ti6Al4V by adding tantalum

Achieving ultra-high strength rapidly in Ti-3Al-8V-6Cr-4Mo-4Zr alloy processed by directed energy deposition

Investigation on the Microstructure and Mechanical Properties of the Ti-Ta Alloy with Unmelted Ta Particles by Laser Powder Bed Fusion

Microstructure and mechanical properties of a newly developed Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V alloy fabricated by laser directed energy deposition

Influence of Tungsten Addition on Microstructure and Tensile Properties of Ti6Al4V Fabricated by Laser-Directed Energy Deposition

Abnormal Aging Behaviors Induced by High-Density Dislocations for an Ultra-High-strength Titanium Alloy Prepared by Laser-Directed Energy Deposition

Composition fine-tuning for directed energy deposition of Ti-6Al-4V

Strength and ductility optimization of laser additive manufactured metastable β titanium alloy by tuning α phase by post heat treatment

Microstructure Evolution and High Strength-Ductility Synergy of Ti-13Nb-13Zr-2Ta Alloy Fabricated by Laser Powder Bed Fusion

Tailoring microstructure with special bimodal structure to improve the ductility and fatigue life of laser powder bed fused Ti6Al4V alloy

Exploring the Heat Treatment Parameters, Microstructural Evolution, and Mechanical Properties of Ti–6Al–4V Alloy Fabricated by a Selective Laser Melting Process

Effect of thermal exposure on microstructure and mechanical properties of Ti65 high-temperature titanium alloy deposited by laser direct energy deposition

Microstructure and High-Temperature Properties of TC31 Alloy Manufactured by Laser Melting Deposition

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Additive Manufactured Ti-6.5Al-2Zr-1Mo-1V Alloy

Effect of Solution and Aging Treatments Parameters on Microstructure and Mechanical Properties of Laser Additive Manufactured Ti-10V-2Fe-3Al Metastable β

Microstructure Evolution and Mechanical Properties of Ti-25Ta Alloy Fabricated by Selective Laser Melting and Hot Isostatic Pressing

Effect of T6 heat treatment on microstructure and mechanical properties of Al–18Si–10Cu–10Ni–5Mn–5Mg alloy prepared by laser-directed energy deposition