Abstract:Laser powder bed fusion (PBF-LB) additive manufacturing (AM) has shown significant promising potential in the fabrication of complex-shaped Nd-Fe-B magnets. However, a challenge arises when printing Nd-Fe-B magnets due to their inherent hardness and brittleness. The large thermal stresses caused by rapid cooling rates and steep temperature gradients easily lead to cracking, substantially degrading their magnetic properties. In the present work, an effective laser in-situ re-scanning strategy is proposed to manufacture Nd-Fe-B magnets by the PBF-LB process since it can mitigate residual stress within the deposited magnets and alleviate the cracking tendency, and its effect on the microstructure and cracking behavior is comprehensively investigated through experimental characterization and numerical simulation. The results indicate that the predominant cracks in the PBF-LB-processed Nd-Fe-B magnet deposits are transcrystalline cracks. It is observed that the crack density in the magnet deposit is efficiently reduced, and the corresponding magnetic properties are enhanced by adopting an optimized laser in-situ re-scanning strategy. This is attributed to the reduction of both the thermal gradient and related stresses in the magnet deposit. Especially, the proposed strategy also promotes the consistency of the grain size of the hard magnetic Nd 2 Fe 14 B phase, contributing to the enhancement of coercivity, without generating undesirable phases in the magnets. As a result, a higher relative density of 96.73 %, coercivity of 718 kA/m, remanence of 0.85 T, and maximum energy product of 85.9 kJ/m 3 are achieved in the PBF-LB-processed Nd-Fe-B magnet deposits from MQP-S powder, which is superior to previously reported results. The present findings provide new insights for the PBF-LB-processed high-performance Nd-Fe-B magnets with crack-free.

An effective laser in-situ re-scanning strategy in laser powder bed fusion of Nd-Fe-B permanent magnets: Crack reduction and magnetic properties enhancement

Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties

Laser powder bed fusion of NdFeB and influence of powder bed heating on density and magnetic properties

Laser powder bed fusion of a nanocrystalline Finemet Fe-based alloy for soft magnetic applications

Laser Powder Bed Fusion of anisotropic Nd-Fe-B bonded magnets utilizing an in situ mechanical alignment approach

Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion

Enhanced magnetic-field-induced strain of Ni-Mn-In alloy by altering laser scanning strategy during laser powder bed fusion

Texture, Microstructure, and Properties of Fe-Cr-Co Permanent Magnetic Alloy Fabricated by Laser Powder Bed Fusion In-Situ Alloying

Additive Manufacturing of Bulk Nanocrystalline FeNdB Based Permanent Magnets

Coercivity enhancement of selective laser sintered NdFeB magnets by grain boundary infiltration

Laser Powder Bed Fusion of Sm-Fe-N Bonded Magnets Employing Flake Powders.

Additive Manufacturing of Bonded Nd–Fe–B—Effect of Process Parameters on Magnetic Properties

Boosting Coercivity of 3D Printed Hard Magnets through Nano-Modification of the Powder Feedstock

Effects of Magnetic Abrasive Finishing on Microstructure and Mechanical Properties of Inconel 718 Processed by Laser Powder Bed Fusion

An effective route for tuning microstructure and properties of sintered Nd-Fe-B magnets: Low pressure sintering technology

Influence of colloidal additivation with surfactant‐free laser‐generated metal nanoparticles on the microstructure of suction‐cast Nd‐Fe‐B alloy

Simultaneous regulation of strength and ductility of laser powder bed fusion manufactured Haynes 230 alloy

Effect of remelting on cracking of Inconel 939 fabricated via laser powder bed fusion

Polymer-bonded magnets produced by laser powder bed fusion: Influence of powder morphology, filler fraction and energy input on the magnetic and mechanical properties

Relationship between microstructure, mechanical and magnetic properties of pure iron produced by laser powder bed fusion (L-PBF) in the as-built and stress relieved conditions

Laser powder bed fusion of GH4099 Ni-based superalloy under a static magnetic field with tailored microstructure and enhanced mechanical performance