Abstract:Abstract Permanent Rare Earth magnets are becoming more and more important in efficient motors and generators with high energy density. Among them NdFeB magnets are the most employed, with NdFeB having higher remanence, high coercivity and energy product. Nevertheless,their poor corrosion resistance makes them susceptible to degradation of the magnetic properties. One possible solution is the development of innovative polymeric composite magnetic materials. The preparation of NdFeB powders filled polymeric matrix (PEEK), with a double goal of protecting the magnetic alloy is proposed, thus preventing it from corrosion, and to realize a new material that can be shaped in the form of filaments. This material was used as feedstock in the 3D printing process to produce high performance magnets with customized and optimized design. The PEEK-NdFeB filaments were produced with three percentages of filler amount(i.e. 25, 50 and 75 wt%). PEEK neat filaments were produced as reference. The influence of the filler on the main thermomechanical properties of the resulting composites, as well as its effect onthe 3D printing process were evaluated by means of different investigation techniques (DSC, DMTA, XRD, tensile testing). The magnetic properties exhibited by Fused Filament Fabrication (FFF) printed parts confirmed the feasibility of employing such a combination of an innovative manufacturing technique and high-performance PEEK-NdFeB compounds. The characterization carried out on both neat and composite filaments evidenced that the presence of the filler slightly decreased the thermal stability, increased the elastic modulus while decreasing ductility and maximum tensile strength. By means of DSC analysis, it was confirmed that the crystallinity is influenced by the presence of the filler. Magnetic measurement performed on the 3D printed parts demonstrate that interesting magnetic properties were achieved, confirming the feasibility of the magnetic 3D printed composite with PEEK.

Polymer-bonded magnets produced by laser powder bed fusion: Influence of powder morphology, filler fraction and energy input on the magnetic and mechanical properties

Laser Powder Bed Fusion of anisotropic Nd-Fe-B bonded magnets utilizing an in situ mechanical alignment approach

Laser Powder Bed Fusion of Sm-Fe-N Bonded Magnets Employing Flake Powders.

Additive Manufactured Polymer-Bonded Isotropic NdFeB Magnets by Stereolithography and Their Comparison to Fused Filament Fabricated and Selective Laser Sintered Magnets

3D Printing of Polymer Bonded Rare-Earth Magnets With a Variable Magnetic Compound Density for a Predefined Stray Field

Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties

3D Printing of Polymer-Bonded Rare-Earth Magnets With a Variable Magnetic Compound Fraction for a Predefined Stray Field

3D printing of polymer-bonded anisotropic magnets in an external magnetic field and by a modified production process

Magneto-active composites with locally tailored stiffness produced by laser powder bed fusion

3D printing of high performance polymer-bonded PEEK-NdFeB magnetic composite materials

Laser powder bed fusion of a nanocrystalline Finemet Fe-based alloy for soft magnetic applications

Additive Manufacturing of Bonded Nd–Fe–B—Effect of Process Parameters on Magnetic Properties

Additive Manufacturing of Bulk Nanocrystalline FeNdB Based Permanent Magnets

Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion

3D Print of Polymer Bonded Rare-Earth Magnets, and 3D Magnetic Field Scanning With an End-User 3D Printer

Laser powder bed fusion of NdFeB and influence of powder bed heating on density and magnetic properties

Additive Manufacturing of Isotropic NdFeB PPS Bonded Permanent Magnets

Boosting Coercivity of 3D Printed Hard Magnets through Nano-Modification of the Powder Feedstock

Topology Optimized and 3D Printed Polymer Bonded Permanent Magnets for a Predefined External Field

Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets