Abstract:Magnetocaloric filament with spacial distribution of fillers and functional response. One important issue associated to magnetocaloric materials that hinders its technological application is the poor processability and structural integrity of those with the highest performance, usually intermetallics undergoing first‐order magnetic phase transitions. Additionally, the performance of these magnetocaloric materials highly depends on the structural stability of the magnetocaloric phase, which is, in many cases, very sensitive to temperature and mechanical processes. Additive manufacturing via the extrusion of polymer‐based composites is regarded as a promising way to overcome these issues. A recently presented manufacturing method of encapsulating functional fillers into polymer capsules has been used to produce a composite filament with a large load of magnetocaloric off‐stoichiometric Ni2MnGa Heusler alloy fillers with a uniform distribution throughout the polymer matrix as demonstrated by x‐ray tomography characterization. The incorporation of these metallic particles causes changes in the thermal behavior of the polymer as well as an increase in the flowability of the composite with respect to the polymer at the same temperature. The increased flowability of the composites found during manufacturing can be compensated by lowering the extrusion temperatures, making this technique even more convenient for preserving the filler properties, which is an important concern when additive manufacturing magnetocaloric materials. This is confirmed by the magnetic and magnetocaloric behavior of the composites, with responses proportional to the fraction of fillers. Highlights Ultrasonic‐atomization produces highly spherical Ni‐Mn‐Ga Heusler alloy particles. Ni‐Mn‐Ga filled polymer capsules allow a direct extrusion of composites for AM. X‐ray tomography shows uniform volumetric filler distribution within the filaments. Decreased viscosity of the matrix favors the lowering of the processing temperature. The low processing temperatures avoid altering the MCE of the alloy fillers.

3D Printing of Polymer Bonded Rare-Earth Magnets With a Variable Magnetic Compound Density for a Predefined Stray Field

3D Printing of Polymer-Bonded Rare-Earth Magnets With a Variable Magnetic Compound Fraction for a Predefined Stray Field

3D Print of Polymer Bonded Rare-Earth Magnets, and 3D Magnetic Field Scanning With an End-User 3D Printer

3D printing of polymer-bonded anisotropic magnets in an external magnetic field and by a modified production process

Topology Optimized and 3D Printed Polymer Bonded Permanent Magnets for a Predefined External Field

Polymer-bonded magnets produced by laser powder bed fusion: Influence of powder morphology, filler fraction and energy input on the magnetic and mechanical properties

Additive Manufactured Polymer-Bonded Isotropic NdFeB Magnets by Stereolithography and Their Comparison to Fused Filament Fabricated and Selective Laser Sintered Magnets

Composite magnetic 3D-printing filament fabrication protocol opens new perspectives in magnetic hyperthermia

3D Printing Technologies for Fabrication of Magnetic Materials Based on Metal–Polymer Composites: A Review

3D printing of high performance polymer-bonded PEEK-NdFeB magnetic composite materials

The magnetic anisotropy of field-assisted 3D printed nylon strontium ferrite composites

Direct-write 3D printing of NdFeB bonded magnets

Recent Developments in 3D Printing of Rare-Earth-Free Permanent Magnets

Polymer‐based filaments with embedded magnetocaloric Ni‐Mn‐Ga Heusler alloy particles for additive manufacturing

Boosting Coercivity of 3D Printed Hard Magnets through Nano-Modification of the Powder Feedstock

In Situ Printing and Functionalization of Hybrid Polymer-Ceramic Composites Using a Commercial 3D Printer and Dielectrophoresis—A Novel Conceptual Design

Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets

Additive Manufactured and Topology Optimized Passive Shimming Elements for Permanent Magnetic Systems

Fabrication of highly dense isotropic Nd-Fe-B bonded magnets via extrusion-based additive manufacturing

A 3D-Printable Polymer-Metal Soft-Magnetic Functional Composite-Development and Characterization