Abstract:Introduction: Magnetostrictive Fe-Ga alloys have garnered extensive attention owing to their excellent magnetic properties and acceptable biocompatibility. Nevertheless, the polycrystalline Fe-Ga alloys currently available tend to display random texture orientations, which constrain their magnetostrictive performance. Objectives: To regulate the texture orientation of Fe-Ga-NbC alloys and thereby enhancing magnetostriction. Methods: In this study, a processing route comprising laser powder bed fusion (LPBF) followed by secondary recrystallization annealing (800, 1000, and 1200 °C, respectively) was developed to prepare Fe-Ga-NbC alloys. Results: The results showed that the LPBF-ed (Fe81Ga19)99(NbC)1 alloys exhibited a high content of high energy grain boundaries (HEGBs) due to the repeated melting and solidification. In subsequent annealing process, the migration of HEGBs induced the rearrangement and recrystallization of grains, during which NbC was found to locate at the grain boundaries and influence the migration path of HEGBs via selective pinning, thereby resulting in a strong Goss texture. With the rise in annealing temperature, the content of Goss texture gradually increased from the initial 3.9 % to 71.3 % at 1200 °C, leading to enhanced magnetostriction, lower saturation magnetization and coercivity. Furthermore, in alternating magnetic fields, the alloys annealed at 1200 °C also exhibited higher magnetostriction than the LPBF-ed alloys. And a noteworthy grain coarsening was also observed after annealing, accompanied by a discernible inclination of magnetic domains towards strip domains. Additional, cell tests demonstrated that the prepared alloys had satisfactory biocompatibility and the ability to promote osteogenic differentiation. Conclusion: These findings indicated that the LPBF-ed and annealed Fe-Ga-NbC alloys might be a promising alternative as magnetostrictive-driven materials for biomedical applications.

Texture, Microstructure, and Properties of Fe-Cr-Co Permanent Magnetic Alloy Fabricated by Laser Powder Bed Fusion In-Situ Alloying

Fe65B22Nd9Mo4 bulk nanocomposite permanent magnets produced by crystallizing amorphous precursors

In Situ Alloying of Fe-Cr-Co Permanent Magnet by Selective Laser Melting of Elemental Iron, Chromium and Cobalt Mixed Powders

Effects of adding Cu on the microstructure and properties of in-situ alloyed Fe–Cr–Co permanent magnets by laser powder bed fusion

Laser powder bed fusion of a nanocrystalline Finemet Fe-based alloy for soft magnetic applications

Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties

Synergistic effects of laser powder bed fusion and annealing on the texture-selective recrystallization of magnetostrictive Fe-Ga-NbC alloys for biomedical applications

An effective laser in-situ re-scanning strategy in laser powder bed fusion of Nd-Fe-B permanent magnets: Crack reduction and magnetic properties enhancement

High throughput in-situ synthesis of Fe-Cr-Ni alloys via laser powder bed fusion: exploring the microstructure and property evolution

Laser-beam powder bed fusion of magnetostrictive Fe 81 Ga 19 alloys: parameter optimization, microstructural evolution and magnetostrictive properties

In Situ Alloyed Medium Entropy Alloy Fabricated by Laser Powder Bed Fusion: Microstructure and Cryogenic Performance

The Microstructure and Magnetic Properties of a Soft Magnetic Fe-12Al Alloy Additively Manufactured via Laser Powder Bed Fusion (L-PBF)

Microstructure transition and mechanical properties of friction stir processed CoCrFeMnNi high entropy alloy fabricated by laser powder bed fusion

Promoting the densification and grain refinement with assistance of static magnetic field in laser powder bed fusion

On the banded microstructures in CoCrMo-Ni in-situ alloyed through laser powder bed fusion

The Printability, Microstructure, and Mechanical Properties of Fe80−xMnxCo10Cr10 High-Entropy Alloys Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Investigation of microstructures and strengthening mechanisms in an N-doped Co-Cr-Mo alloy fabricated by laser powder bed fusion

In-situ Alloyed CoCrFeMnNi High Entropy Alloy:Microstructural Development in Laser Powder Bed Fusion

Laser Powder Bed Fusion of a Non-Equiatomic FeNiCoAl-based High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties

Effect of Static Magnetic Field on the Chemical Short-Range Order of CoCrFeMnNi High-Entropy Alloy Prepared by Laser Powder Bed Fusion

Fabrication and Characterization of a Low Magnetic Zr-1Mo Alloy by Powder Bed Fusion Using a Fiber Laser