Abstract:The surface or sheath effect on core-shell nanowires plays an important role in the nanomechanical test. In the past few years, SiC nanowires have been synthesized using various methods with an uneven and uncontrollable amorphous silicon dioxide sheath. The bending Young’s modulus of the SiC nanowires has scarcely been measured and the effect of the oxide sheath has not been taken into account. In this paper, SiO2-coated SiC (SiO2@SiC) nanowires were synthesized using the chemical vapor deposition method, followed by thermal reduction. Scanning electron microscopy and transmission electron microscopy show that the SiO2@SiC nanowires in this paper have diameters ranging from 130 ~ 150 nm, with the average thickness of SiO2 layer approximately 14 nm. After different processing times with 1 mol/L NaOH, approximately 5 nm, 9 nm, 14 nm silicon dioxide layers were obtained. The results of the three-point-bending test show that the modulus of SiO2@SiC nanowires is found to clearly decrease with the increase in oxide thickness and the influence of the oxide sheath should not be ignored when the layer thickness is above 5 nm. Young’s modulus of the SiO2@SiC nanowires calculated in this study by the core-shell structure model is in good agreement with the theoretical value.

Effects of skeleton pore size on the microstructure and electromagnetic absorbing property of the SiC nanowires/SiC composites

Effects of pore size on electrical and thermal properties of porous SiC ceramics

Preparation, mechanical, dielectric and microwave absorption properties of hierarchical porous SiCnw-Si3N4 composite ceramics

Effect of Different Oxide Thickness on the Bending Young'S Modulus of Sio2@Sic Nanowires

Effect of Reinforcement Size on Mechanical Behavior of SiC-Nanowires-Reinforced 6061al Composites

Effect of pore structure evolution on mechanical properties and thermal conductivity of porous SiC-Mullite ceramics

Effects of pore structures on the dielectric properties of silicon nitride-based ceramics

A comparative study on dielectric and mechanical properties of porous β-Si3N4 ceramics by controlling porosity and microstructure

Achieving Remarkable Specific Mechanical Strength and Energy Absorption Capacity in SiC Nanowire Networks through Graded Structural Design

Effects of pore density on microstructure and mechanical properties of porous SiC ceramic foam/Zr-based metallic glass interpenetrating phase composites

Effect of Si<sub>3</sub>N<sub>4</sub> Nanowires on the Mechanical Properties and Dielectric Constant of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Micro/nanostructure constructed by in situ growth of SiC nanowires in porous Si3N4 ceramics

Effect of Different Particle Sizes and Pore-Making Agent Ratio on Properties of SiC Porous Ceramics

Effects of pore morphology on the fabrication and mechanical properties of porous Si3N4 ceramics

SiC Nanowire Mesh in High-Porosity Silicon Foam for Enhanced Electromagnetic Wave Absorption

Numerical and Experimental Studies of the Pore Size Impacts on Dielectric and Mechanical Properties for Porous Si <sub>3</sub>N <sub>4</sub> for Radome Application

Effects of Pore Morphology on the Fabrication and Mechanical Properties of Porous Si<sub>3</sub>N<sub>4</sub> Ceramics

Strong Effect of Atmosphere on the Microstructure and Microwave Absorption Properties of Porous SiC Ceramics

Porous SiC Ceramics with Controllable Porosity Achieved by Micro-sized Powder through Recrystallization Sintering

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites