Abstract:The use of secondary batteries has been on the rise in recent years, especially solid-state batteries. However, security issues have become a major challenge in practical applications. Both lithium-ion batteries and lithium–sulfur batteries have safety problems that need to be solved. Herein, a polymer electrolyte suitable for the two types of batteries was easily synthesized. A polyvinylidene fluoride (PVDF)-based polymer electrolyte with 1-butyl-1-methyl pyrrolidine bis-trifluoromethyl sulfonimide (Py14TFSI) was used as the solid electrolyte. The ionic conductivity of the LiTFSI/Py14TFSI/cellulose acetate (CA)/PVDF polymer electrolyte was 1.45 × 10–4 S cm–1. The electrochemical stability window was 4.95 V. The transference number of the lithium ion was 0.231. The constant-current polarization test results showed that the polarization voltage was only 0.04 V when the current density was 1 mA cm–2. The first discharge specific capacity of the Li | LiTFSI/Py14TFSI/CA/PVDF | LiFePO4 battery was 125.7 mA h g–1 (0.5 C), and the capacity retention rate was 95.22% after 50 cycles at room temperature. A multistage porous conductive carbon (M-PCC) material with micropores and mesopores was applied as the host of the sulfur cathode of lithium–sulfur batteries. The M-PCC material provided a carrier for sulfur and sulfide with a specific surface area of 1132.68 m2 g–1. The solid-state lithium–sulfur battery (Li | LiTFSI/Py14TFSI/CA/PVDF | ) had excellent electrochemical performance. The first discharge specific capacity was 1245.9 mA h g–1 with an average Coulombic efficiency of 97.34%. The energy of Py14TFSI cation and Li2S8 calculated by DFT was 8.8345 eV, which indicated that the polysulfide cannot adsorb onto the polymer electrolyte. XPS was used to measure the elemental composition of the anode–electrolyte interface after charge–discharge cycling. The uniform growth of lithium dendrite was observed by the SEM image of the anode after cycles. The results showed that a solid-state lithium–sulfur battery produced uniform solid electrolyte interface films and completely suppressed the shuttle effect.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00658?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00658</a>.Experimental section; characterization; AFM of polymer electrolyte: PVDF/Py14TFSI = 10:0 and PVDF/Py14TFSI = 10:7.5; XRD patterns of M-PCC; SEM images of M-PCC and ; TEM images of M-PCC (40,000×) and M-PCC(200,000×); CV curves of the Li | liquid electrolyte/PP separator | battery; active products at different charge and discharge stages; impedance spectrum at different cycles of the Li | liquid electrolyte/PP separator | battery; TG curve of ; and comparison the discharge specific capacity of the Li | LiTFSI/Py14TFSI/CA/PVDF | battery with the previously reported solid polymer electrolyte lithium–sulfur batteries at different temperatures and rate capabilities (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00658/suppl_file/ae1c00658_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Interfacial Chemistry and Ion Transfer Mechanism for Tailored Poly(thioether) Enabled Hybrid Solid Polymer Electrolyte with Electrochemical Properties in All-Solid-State Lithium-Sulfur Batteries

Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries

A High Ion Conductive Solid Electrolyte Film and Interface Stabilization Strategy for Solid-state Li-S Battery

Interface Design Enabling Stable Polymer/Thiophosphate Electrolyte Separators for Dendrite-Free Lithium Metal Batteries.

Enhanced electrochemical stability and ion transfer rate: A polymer/ceramic composite electrolyte for high-performance all-solid-state lithium-sulfur batteries

Cationic Cyclopropenium-Based Hyper-Crosslinked Polymer Enhanced Polyethylene Oxide Composite Electrolyte for All-Solid-State Li-S Battery

Hybrid Crosslinked Solid Polymer Electrolyte via In‐Situ Solidification Enables High‐Performance Solid‐State Lithium Metal Batteries

Key issues and modification strategies towards high-performance polymer all-solid-state lithium-sulfur batteries

A Chitosan/Poly(ethylene Oxide)‐based Hybrid Polymer Composite Electrolyte Suitable for Solid‐State Lithium Metal Batteries

Superior Blends Solid Polymer Electrolyte with Integrated Hierarchical Architectures for All-Solid-State Lithium-Ion Batteries

Ternary Stabilization Strategies for Succinonitrile-Based in Situ Polymerized Electrolyte Enabling High-Performance Solid Lithium Metal Batteries

Facile and Powerful In Situ Polymerization Strategy for Sulfur-Based All-Solid Polymer Electrolytes in Lithium Batteries

In Situ Polymerization Bi‐Functional Gel Polymer Electrolyte for High Performance Quasi‐Solid‐State Lithium−Sulfur Batteries

Achieving High-Performance Lithium-Sulfur Batteries by Modulating Li+ Desolvation Barrier with Liquid Crystal Polymers

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

Solid-State Polymer Electrolyte Solves the Transfer of Lithium Ions between the Solid–Solid Interface of the Electrode and the Electrolyte in Lithium–Sulfur and Lithium-Ion Batteries

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane

Deciphering and Integrating Functionalized Side Chains for High Ion-Conductive Elastic Ternary Copolymer Solid-State Electrolytes for Safe Lithium Metal Batteries

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Regulating and Understanding the Compatibility of Sulfide Composite Solid-State Electrolyte in Nickel-Rich Lithium Metal Batteries

Asymmetric Trihalogenated Aromatic Lithium Salt Induced Lithium Halide Rich Interface for Stable Cycling of All-Solid-State Lithium Batteries