Abstract:There is a growing interest in all-solid-state lithium batteries(ASLBs) for their safety and high energy density. However, the power density for ASLBs is still far away from satisfactory on the account of high interfacial resistance at electrode / solid electrolyte interface. For example, Garnet-type solid-state electrolytes (SSEs) are considered as a good choice for solid-state batteries, yet the interfacial issues with metallic Li limit their applications. In my group, we propose an ultra-simple and effective strategy to enhance the interfacial connection between garnet SSEs and Li metal just by drawing a graphite-based soft interface with a pencil[1]. Both experimental analysis and theoretical calculations confirm that the reaction between graphite-based interfacial layer and metallic lithium forms a lithiated connection interface with good lithium-ionic and electronic conductivity. Compared to the reported interfacial materials, the graphite material provides a soft interface with better ductility and compressibility. With the improvement by this soft interface, the impedance of symmetric Li cells significantly decreases from 1350 to 105Ωcm2 and the cell can cycle for over 1000hoursat a current density of 300 μA/cm2 at room temperature. Moreover, a solid-state battery with Li-metal anode, ternary cathode NCM523 and graphite-based interface modified garnet SSEs is fabricated and displays excellent rate capability and long cycling performance. In addition, LGPS-type materials show extremely high Li+ conductivity. But when in contact to Li metal, they can be reduced to produce Li2S, Li3P and Li-M alloy and form a mixed ionic and electronic conducting layer at the interface, which hinders the application of Li metal in such solid electrolyte system. We report on a simple approach for the modification of the interface between Li and Li10SnP2S12 sulfide solid electrolyte by utilizing ionic liquid[2]. Our study shows that the addition of 1.5M LiTFSI/Pyr13TFSI ionic liquid can not only promote intimate contact but can in-situ form a stable SEI layer at the interface between Li and solid electrolyte as well. A stable SEI layer instead of mixed conducting layer can prevent sulfide solid electrolyte from further decomposition and improve the cycle performance of batteries. References: 1) Y.J. Shao, H.C.Wang, et al ; ACS Energy Lett.; 2018, 3, 1212-1218 2) B.Z. Zheng; J.P.Zhu, et al; ACS Applied Mater. & Interfaces; 2018, 10, 25473-25482

Interface Design Enabling Stable Polymer/Thiophosphate Electrolyte Separators for Dendrite-Free Lithium Metal Batteries.

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Poly(ethylene oxide)-based composite solid electrolyte for long cycle life solid-state lithium metal batteries: Improvement of interface stability through a dual mechanism

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

Interfacial Chemistry and Ion-Transfer Mechanism for a Tailored Poly(thioether)-Enabled Hybrid Solid Polymer Electrolyte with Electrochemical Properties in All-Solid-state Lithium-Sulfur Batteries

Interfacial Chemistry and Ion Transfer Mechanism for Tailored Poly(thioether) Enabled Hybrid Solid Polymer Electrolyte with Electrochemical Properties in All-Solid-State Lithium-Sulfur Batteries

Dynamic Interfacial Protection via Molecularly Tailored Copolymer for Durable Artificial Solid Electrolyte Interphase in Lithium Metal Batteries

Eliminating Li Dendrites in PEO-Based Polymer Solid Electrolytes by Doping with SbF<sub>3</sub>

A Deformable Dual-Layer Interphase for High-Performance Li10GeP2S12-based Solid-State Li Metal Batteries

Stabilizing Li4SnS4 Electrolyte from Interface to Bulk Phase with a Gradient Lithium Iodide/Polymer Layer in Lithium Metal Batteries

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane

Regulation of Polysulfide Adsorption and LiF-rich Interface Chemistry to Achieve High-Performance PEO-based Lithium-Sulfur Batteries

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Taming Interfacial Instability in Lithium–Oxygen Batteries: A Polymeric Ionic Liquid Electrolyte Solution

(Invited) Construction of Flexible Interfacial Layer for Solid-State Li Batteries

Reactive Polymer As Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries

Interfacial Catalysis Strategy for High-Performance Solid-State Lithium Metal Batteries

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

PEO-based Composite Solid Electrolyte for Lithium Battery with Enhanced Interface Structure

Manipulating Electrolyte and Solid Electrolyte Interphase to Enable Safe and Efficient Li-S Batteries