Abstract:The development of lithium–sulfur (Li–S) batteries is of practical significance to meet the rapidly escalating demand for advanced energy storage technologies with long life and high-energy density. However, the dissolution and shuttling of the intermediate polysulfides (PS) initiates the loss of active sulfur and the poisoning of the lithium anode, leading to unsatisfactory cyclability and consequently hinders the commercialization of Li–S batteries. Herein, we develop a facile strategy to tame the PS dissolution and the shuttling effect in the Li–S system by introducing a modified polybenzimidazole (mPBI) with multiple functions. As a binder, the excellent mechanical property of mPBI endows the sulfur electrode with strong integrity and, therefore, results in high sulfur loading (7.2 mg cm−2), whereas the abundant chemical interaction between mPBI and PS affords efficient PS adsorption to inhibit sulfur loss and prolong battery life. As a functional agent for the separator, the mPBI builds a PS shield onto the separator to block PS’s migration to further suppress the PS shuttling. The dual actions of mPBI confer an excellent performance of 750 mAh g−1 (or 5.2 mAh cm−2) after 500 cycles at C/5 on the Li–S battery with an ultralow capacity fading rate of 0.08% per cycle. Researchers have used a super-stable polymer to block adverse dissolution effects in energy-rich rechargeable lithium-sulfur batteries. Polybenzimidazole (PBI) polymers find use in firefighting equipment and astronaut spacesuits because of their high mechanical and thermal stability. Research team led by Shanqing Zhang from Griffith Universityin Australia and Zhoupeng Li from Zhejiang University in China now shows that PBI can make an attractive binder and separating agent for next-generation batteries. While the lithium-sulfur system has higher energy density than current lithium-ion batteries, polysulfides shuttling effect, the main technical barrier often degrades device efficiency. The team prepared a new electrode by mixing a sulfur-carbon composite with a modified form of PBI. They found battery durability improved by three to five times over typical polymer binders, while favorable binding interactions between PBI and polysulfides enhanced performance and cycling stability. A modified polybenzimidazole (mPBI) was synthesized to tame the polysulfides (PS) shuttling in Li–S batteries via dual actions. As a binder, the mPBI mechanically and chemically offers strong electrode integrity and high sulfur loading, inhibits sulfur loss and prolongs lifespan for sulfur electrode. As a functional agent, the mPBI builds a shield onto the separator to block PS migration so as to further suppress the PS shuttling. This strategy confers an excellent performance of 750 mAh g−1 (or 5.2 mAh cm−2) after 500 cycles at C/5 for the resultant Li–S battery with an ultralow capacity fading rate of 0.08% per cycle.

Achieving High-Performance Lithium-Sulfur Batteries by Modulating Li+ Desolvation Barrier with Liquid Crystal Polymers

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Construction of Soft Base Tongs on Separator to Grasp Polysulfides from Shuttling in Lithium-Sulfur Batteries.

A Multi Functional Binder with Lithium Ion Conductive Polymer and Polysulfide Absorbents to Improve Cycleability of Lithium–sulfur Batteries

A Novel Laminated Separator with Multi Functions for High-Rate Dischargeable Lithium–sulfur Batteries

Balancing the Seesaw: Investigation of a Separator to Grasp Polysulfides with Diatomic Chemisorption.

Enhanced cycle performance of lithium-sulfur batteries using a separator modified with a PVDF-C layer.

Synergetic effect of block and catalysis on polysulfides by functionalized bilayer modification on the separator for lithium-sulfur batteries

In Situ Polymerization Bi‐Functional Gel Polymer Electrolyte for High Performance Quasi‐Solid‐State Lithium−Sulfur Batteries

Interfacial Chemistry and Ion Transfer Mechanism for Tailored Poly(thioether) Enabled Hybrid Solid Polymer Electrolyte with Electrochemical Properties in All-Solid-State Lithium-Sulfur Batteries

Solvent Engineered Scalable Production of Polysulfide Blocking Shields to Enhance Practical Lithium Sulfur Batteries

The Dual Actions of Modified Polybenzimidazole in Taming the Polysulfide Shuttle for Long-Life Lithium–sulfur Batteries

A gel polymer electrolyte functionalized separator for high-performance lithium-sulfur batteries

A Lithium‐Affinitive Covalent Organic Polymer Network Functionalized Separator for Dendrite‐Free and High‐Durability Lithium–Sulfur Batteries under Harsh Conditions

In Situ Self‐Polymerization of Thioctic Acid Enabled Interphase Engineering Towards High‐Performance Lithium–Sulfur Battery

Blocking Polysulfides and Facilitating Lithium-Ion Transport: Polystyrene Sulfonate@HKUST-1 Membrane for Lithium-Sulfur Batteries

Dual taming of polysufides by phosphorus-doped carbon for improving electrochemical performances of lithium–sulfur battery

A Polysulfide-Immobilizing Polymer Retards the Shuttling of Polysulfide Intermediates in Lithium-Sulfur Batteries.

A Lithium/Polysulfide Battery with Dual-Working Mode Enabled by Liquid Fuel and Acrylate-Based Gel Polymer Electrolyte.

Polyoxometalates-rich Separator for Fast Polysulfide Conversion Kinetics and Dense Lithium Deposition Toward Stable Li–S Batteries

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane