Abstract:This article discusses the phase‐contrast effect and compares two simulation methods based on different theoretical frameworks. It demonstrates the ability to reproduce the phase effect in experimental data, using the well known simulation framework McStas [Willendrup & Lefmann (2020). J. Neutron Res.22, 1–16].Propagation‐based phase contrast, for example in the form of edge enhancement contrast, is well established within X‐ray imaging but is not widely used in neutron imaging. This technique can help increase the contrast of low‐attenuation samples but may confuse quantitative absorption measurements. Therefore, it is important to understand the experimental parameters that cause and amplify or dampen this effect in order to optimize future experiments properly. Two simulation approaches have been investigated, a wave‐based simulation and a particle‐based simulation conducted in McStas [Willendrup & Lefmann (2020). J. Neutron Res.22, 1–16], and they are compared with experimental data. The experiment was done on a sample of metal foils with weakly and strongly neutron absorbing layers, which were measured while varying the rotation angle and propagation distance from the sample. The experimental data show multiple signals: attenuation, phase contrast and reflection. The wave model reproduces the sample attenuation and the phase peaks but it does not reproduce the behavior of these peaks as a function of rotation angle. The McStas simulation agrees better with the experimental data, as it reproduces attenuation, phase peaks and reflection, as well as the change in these signals as a function of rotation angle and distance. This suggests that the McStas simulation approach, where the particle description of the neutron facilitates the incorporation of multiple effects, is the most convenient way of modeling edge enhancement in neutron imaging.

Polychromatic neutron phase contrast imaging of weakly absorbing samples enabled by phase retrieval

Phase‐contrast neutron imaging compared with wave propagation and McStas simulations

Achromatic Non-Interferometric Single Grating Neutron Phase Imaging

Single-exposure elemental differentiation and texture-sensitive phase-retrieval imaging with a neutron counting micro-channel plate detector

Preliminary study on thermal neutron phase contrast radiography

Neutron phase filtering for separating phase- and attenuation signal in aluminium and anodic aluminium oxide

Spectral propagation-based x-ray phase-contrast computed tomography

Crystalline phase discriminating neutron tomography using advanced reconstruction methods

Fast three-dimensional phase retrieval in propagation-based x-ray tomography

Differential phase contrast for quantitative imaging and spectro-microscopy at a nanoprobe beamline

Phase and contrast moiré signatures in two-dimensional cone beam interferometry

Sub-micrometer resolution neutron tomography

Subnanoradian X-ray phase-contrast imaging using a far-field interferometer of nanometric phase gratings

Phase-contrast imaging of weakly absorbing materials using hard X-rays

Performance Analysis of Quantitative Phase Retrieval Method in Zernike Phase Contrast X-ray Microscopy

Eikonal phase retrieval: Unleashing the fourth generation sources potential for enhanced propagation based tomography on biological samples

Single spectrum three-material decomposition with grating-based x-ray phase-contrast CT

Small-angle scattering interferometry with neutron orbital angular momentum states

Polarized neutron Laue diffraction on a crystal containing dynamically polarized proton spins

Interpretable and efficient contrast in scanning transmission electron microscopy with a diffraction grating beamsplitter

Elemental X-Ray Imaging Using Zernike Phase Contrast