Abstract:This article discusses the phase‐contrast effect and compares two simulation methods based on different theoretical frameworks. It demonstrates the ability to reproduce the phase effect in experimental data, using the well known simulation framework McStas [Willendrup & Lefmann (2020). J. Neutron Res.22, 1–16].Propagation‐based phase contrast, for example in the form of edge enhancement contrast, is well established within X‐ray imaging but is not widely used in neutron imaging. This technique can help increase the contrast of low‐attenuation samples but may confuse quantitative absorption measurements. Therefore, it is important to understand the experimental parameters that cause and amplify or dampen this effect in order to optimize future experiments properly. Two simulation approaches have been investigated, a wave‐based simulation and a particle‐based simulation conducted in McStas [Willendrup & Lefmann (2020). J. Neutron Res.22, 1–16], and they are compared with experimental data. The experiment was done on a sample of metal foils with weakly and strongly neutron absorbing layers, which were measured while varying the rotation angle and propagation distance from the sample. The experimental data show multiple signals: attenuation, phase contrast and reflection. The wave model reproduces the sample attenuation and the phase peaks but it does not reproduce the behavior of these peaks as a function of rotation angle. The McStas simulation agrees better with the experimental data, as it reproduces attenuation, phase peaks and reflection, as well as the change in these signals as a function of rotation angle and distance. This suggests that the McStas simulation approach, where the particle description of the neutron facilitates the incorporation of multiple effects, is the most convenient way of modeling edge enhancement in neutron imaging.

Neutron phase filtering for separating phase- and attenuation signal in aluminium and anodic aluminium oxide

Phase‐contrast neutron imaging compared with wave propagation and McStas simulations

Neutron Irradiation Effect on Permeability and Magnetoimpedance of Amorphous and Nanocrystalline Magnetic Materials

Polychromatic neutron phase contrast imaging of weakly absorbing samples enabled by phase retrieval

Preliminary study on thermal neutron phase contrast radiography

Achromatic Non-Interferometric Single Grating Neutron Phase Imaging

Investigating Hydrogen in Zirconium Alloys by Means of Neutron Imaging

A New Approach for Extracting Phase Effect Based on In-Line X-ray Phase Imaging

Characterization and MCNP simulation of neutron energy spectrum shift after transmission through strong absorbing materials and its impact on tomography reconstructed image

Nanostructured-membrane electron phase plates

Neutron Reflectivity in Corrosion Research on Metals

Neutron optical beam splitter from holographically structured nanoparticle-polymer composites

Neutron reflectometry on highly absorbing films and its application to 10B4C-based neutron detectors

New materials for thin-film phase-plates

Modeling phase separation and composition patterning in FeCrAl alloys at neutron irradiation

High performance neutron passive imaging with a self-collimating neutron camera

Neutron Laminography-A Novel Approach to Three-Dimensional Imaging of Flat Objects with Neutrons

A strategy of consistent X-ray and neutron double-difference pair distribution function analysis of nanoparticle dispersions

Crystalline phase discriminating neutron tomography using advanced reconstruction methods

Statistical Image Reconstruction for High-Throughput Thermal Neutron Computed Tomography

Simulation of Associated Particle Technique used for Reducing Noise in 14 MeV Neutron Radiography