Abstract:Air/GaN diffraction gratings with a submicron periodicity embedded in the GaN volume are demonstrated. Gratings optical performance measured by angle‐ and polarization–resolved reflectivity is in excellent agreement with theoretical modeling. Such custom‐shaped, fully integrated photonic structures pave the way for novel type constructions of optoelectronic devices, such as compact distributed feedback laser diodes with ultra‐high coupling with the optical mode. The integration of photonic elements with nitride optoelectronic structures allows control of emitted light properties, which is advantageous for achieving, e.g., a single wavelength lasing. Positioning of the photonic structures on the top surface of GaN‐based devices is problematic, in particular, for deposition of a metal contact to p‐type top layer. In this work, custom‐shaped submicron air channels arranged periodically 150 nm below the sample surface, forming an air/GaN diffraction grating embedded within a volume of the structure is proposed and fabricated. The fabrication process includes selective area Si ion implantation, GaN regrowth using plasma‐assisted molecular beam epitaxy, ultra‐high‐pressure annealing for efficient electrical activation of implanted Si without diffusion, and electrochemical etching for the removal of selectively doped material. Embedded air/GaN diffraction gratings with periodicity of 460 and 631 nm are shown. Width of air channels ranges from 46 to 320 nm. Angle and polarization resolved reflectivity measurements combined with theoretical modeling confirm the designed optical performance of the embedded diffraction gratings in the GaN volume. The presented design and fabrication of custom‐shaped, fully integrated photonic structures buried below the surface paves the way for novel type constructions of optoelectronic devices, such as compact distributed feedback laser diodes

Fabrication and transfer print based integration of free-standing GaN membrane micro-lenses onto semiconductor chips

Additive GaN solid immersion lenses for enhanced photon extraction efficiency from diamond color centers

Demonstration of High-Performance, Sub-Micron Chalcogenide Glass Photonic Devices by Thermal Nanoimprint

Fabrication of Suspended Light-Emitting Diode and Waveguide on a Single Chip

Photonic integration of lithium niobate micro-ring resonators onto silicon nitride waveguide chips by transfer-printing

UV-Nanoimprint and Deep Reactive Ion Etching of High Efficiency Silicon Metalenses: High Throughput at Low Cost with Excellent Resolution and Repeatability

Laser-Driven Micro Transfer Placement of Prefabricated Microstructures

Quasi van der Waals Epitaxy of Single Crystalline GaN on Amorphous SiO2/Si(100) for Monolithic Optoelectronic Integration

Optical Nanofabrication of Concave Microlens Arrays

Development of Nanopillar Arrays Nanopatterning Without Lift‐Off for Transferable GaN‐Based μLEDs

Towards High Throughput Large Area Metalens Fabrication using UV-Nanoimprint lithography and Bosch Deep Reactive Ion Etching

Scalable fabrication of hemispherical solid immersion lenses in silicon carbide through grayscale hard-mask lithography

Transfer Printing of Thin-Film Microscale Gaas Lasers on Silicon

Nanocrystalline diamond-glass platform for the development of three-dimensional micro- and nanodevices

In-Situ 3D Nano-Printing of Freeform Coupling Elements for Hybrid Photonic Integration

Unidirectional emission of GaN-on-Si microring laser and its on-chip integration

Submicron Embedded Air/GaN Diffraction Gratings for Photonic Applications

On-wafer fabrication of cavity mirrors for InGaN-based laser diode grown on Si

Deterministic integration and optical characterization of telecom O-band quantum dots embedded into wet-chemically etched Gaussian-shaped microlenses

Wafer-scale transfer route for top–down III-nitride nanowire LED arrays based on the femtosecond laser lift-off technique

Laser nano-fabrication inside silicon with spatial beam modulation and non-local seeding