Abstract:We developed a broadband two-layer anti-reflection (AR) coating for use on a sapphire half-wave plate (HWP) and an alumina infrared (IR) filter for the cosmic microwave background (CMB) polarimetry. Measuring the faint CMB B-mode signals requires maximizing the number of photons reaching the detectors and minimizing spurious polarization due to reflection with an off-axis incident angle. Sapphire and alumina have high refractive indices of 3.1 and are highly reflective without an AR coating. This paper presents the design, fabrication, quality control, and measured performance of an AR coating using thermally-sprayed mullite and Duroid 5880LZ. This technology enables large optical elements with diameters of 600 mm. We also present a newly developed thermography-based nondestructive quality control technique, which is key to assuring good adhesion and preventing delamination when thermal cycling. We demonstrate the average reflectance of about 2.6% (0.9%) for two observing bands centered at 90/150 (220/280) GHz. At room temperature, the average transmittance of a 105 mm square test sample at 220/280 GHz is 83%, and it will increase to 90% at 100 K, attributed to reduced absorption losses. Therefore, our developed layering technique has proved effective for 220/280 GHz applications, particularly in addressing dielectric loss concerns. This AR coating technology has been deployed in the cryogenic HWP and IR filters of the Simons Array and the Simons observatory experiments and applies to future experiments such as CMB-S4.

Laminate polyethylene window development for large aperture millimeter receivers

BICEP/Keck XIX: Extremely Thin Composite Polymer Vacuum Windows for BICEP and Other High Throughput Millimeter Wave Telescopes

Ultra High Molecular Weight Polyethylene: optical features at millimeter wavelengths

Multi-layer anti-reflection coats using ePTFE membrane for mm-wavelength plastic optics

Design of Submillimeter Wave Receiver Window with High Transmittance, High Intensity and Infrared Filtering

Fabry-Pérot open resonant cavities for measuring the dielectric parameters of mm-wave optical materials

Design and performance of wide-band corrugated walls for the BICEP Array detector modules at 30/40 GHz

Broadband, millimeter-wave antireflection coatings for large-format, cryogenic aluminum oxide optics

Ultra thin polymer foil cryogenic window for antiproton deceleration and storage

Thermal Testing for Cryogenic CMB Instrument Optical Design

A Soft X-ray Beam-splitting Multilayer Optic for the NASA GEMS Bragg Reflection Polarimeter

Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics

Bicep3: A 95 Ghz Refracting Telescope for Degree-Scale Cmb Polarization

Testing multilayer-coated polarizing mirrors for the LAMP soft X-ray telescope

A Dual-polarized Broadband Planar Antenna and Channelizing Filter Bank for Millimeter Wavelengths

Optomechanical Design Considerations for a Vacuum Window for Optical and Infrared Interferometry

Geometrical and physical optics analysis for mm-wavelength refractor telescopes designed to map the cosmic microwave background

Commercialization of micro-fabrication of antenna-coupled Transition Edge Sensor bolometer detectors for studies of the Cosmic Microwave Background

Design and experimental investigation of a planar metamaterial Silicon based lenslet

Commercially fabricated antenna-coupled Transition Edge Sensor bolometer detectors for next generation Cosmic Microwave Background polarimetry experiment

WSPEC: A waveguide filter-bank focal plane array spectrometer for millimeter wave astronomy and cosmology