Abstract:Transient terahertz time-domain spectroscopy (THz-TDS) imaging has emerged as a novel non-ionizing and noninvasive biomedical imaging modality, designed for the detection and characterization of a variety of tissue malignancies due to their high signal-to-noise ratio and submillimeter resolution. We report our design of a pair of aspheric focusing lenses using a commercially available lens-design software that resulted in about 200 × 200-μm2 focal spot size corresponding to the 1-THz frequency. The lenses are made of high-density polyethylene (HDPE) obtained using a lathe fabrication and are integrated into a THz-TDS system that includes low-temperature GaAs photoconductive antennae as both a THz emitter and detector. The system is used to generate high-resolution, two-dimensional (2D) images of formalin-fixed, paraffin-embedded murine pancreas tissue blocks. The performance of these focusing lenses is compared to the older system based on a pair of short-focal-length, hemispherical polytetrafluoroethylene (TeflonTM) lenses and is characterized using THz-domain measurements, resulting in 2D maps of the tissue refractive index and absorption coefficient as imaging markers. For a quantitative evaluation of the lens effect on the image resolution, we formulated a lateral resolution parameter, R2080, defined as the distance required for a 20–80% transition of the imaging marker from the bare paraffin region to the tissue region in the same image frame. The R2080 parameter clearly demonstrates the advantage of the HDPE lenses over TeflonTM lenses. The lens-design approach presented here can be successfully implemented in other THz-TDS setups with known THz emitter and detector specifications.

Ultra High Molecular Weight Polyethylene: optical features at millimeter wavelengths

Laminate polyethylene window development for large aperture millimeter receivers

BICEP/Keck XIX: Extremely Thin Composite Polymer Vacuum Windows for BICEP and Other High Throughput Millimeter Wave Telescopes

Multi-layer anti-reflection coats using ePTFE membrane for mm-wavelength plastic optics

Ultrahigh Molecular Weight Polyethylene Lamellar‐Thin Framework on Square Meter Scale

Fabry-Pérot open resonant cavities for measuring the dielectric parameters of mm-wave optical materials

Terahertz Characterization Microcellular Polyethylene Terephthalate (MCPET) across Broad Temperature Range

Design of Submillimeter Wave Receiver Window with High Transmittance, High Intensity and Infrared Filtering

Ultraviolet-induced fluorescence of poly(methyl methacrylate) compared to 1,1,4,4-tetraphenyl-1,3-butadiene down to 4 K

High-Pressure Raman Studies of Ultra-High-Molecular-Weight Polyethylene

Measurement of optical attenuation in acrylic light guides for a dark matter detector

Characterisation of Dielectric Materials at G-Band (140-220Ghz) Using a Guided Free-Space Technique

Cosmic radiation shielding tests for UHMWPE fiber/nano-epoxy composites

Anti-reflection coating with mullite and Duroid for large-diameter cryogenic sapphire and alumina optics

UV degradation of the optical properties of acrylic for neutrino and dark matter experiments

High-Density Polyethylene Custom Focusing Lenses for High-Resolution Transient Terahertz Biomedical Imaging Sensors

Achieving high thermal conductivity and mechanical reinforcement in ultrahigh molecular weight polyethylene bulk material

Photoluminescence response of acrylic (PMMA) and polytetrafluoroethylene (PTFE) to ultraviolet light

Ultra-High Repetition Rate Terahertz Time-Domain Spectroscopy for Micrometer Layer Thickness Measurement

Reflectance dependence of polytetrafluoroethylene on thickness for xenon scintillation light

Melting Behavior and Morphology of Freeze-Dried Ultra-High Molar Mass Polyethylene