Abstract:This paper presents an analysis of the mechanical properties of different polymer optical fibers (POFs) at ultraviolet (UV) radiation conditions. Cyclic transparent optical polymer (CYTOP) and polymethyl methacrylate (PMMA) optical fibers are used in these analyses. In this case, the fiber samples are irradiated at the same wavelength, pulse time and energy conditions for different times, namely, 10 s, 1 min, 2 min and 3 min. The samples are tested in tensile tests and dynamic mechanical thermal analysis (DMTA) to infer the variation in the static and dynamic properties of such fibers as a function of the UV radiation condition. Furthermore, reference samples of each fiber (without UV radiation) are tested for comparison purposes. The results show a lower UV resistance of PMMA fibers, i.e., higher variation in the material features in static conditions (Young's modulus variation of 0.65 GPa). In addition, CYTOP fiber (material known for its high UV resistance related to its optical properties) also presented Young's modulus variation of around 0.38 GPa. The reason for this reduction in the moduli is related to possible localized annealing due to thermal effects when the fibers are subjected to UV radiation. The dynamic results also indicated a higher variation in the PMMA fibers storage modulus, which is around 30% higher than the variations in the CYTOP fibers when different radiation conditions are analyzed. However, CYTOP fibers show a smaller operational temperature range and higher variation in the storage modulus as a function of the temperature when compared with PMMA fibers. In contrast, PMMA fibers show higher variations in their material properties when subjected to oscillatory loads at different frequency conditions. Thus, the results obtained in this work can be used as guidelines for the influence of UV radiation in POFs not only for the material choice, but also on the limitations of UV radiation in the fabrication of the grating as well as in sensor applications at UV radiation conditions.

UV degradation of the optical properties of acrylic for neutrino and dark matter experiments

Measurement of optical attenuation in acrylic light guides for a dark matter detector

Ultraviolet-induced fluorescence of poly(methyl methacrylate) compared to 1,1,4,4-tetraphenyl-1,3-butadiene down to 4 K

Long-term testing and properties of acrylic for the Daya Bay antineutrino detectors

Study on U/Th residual radioactivity in acrylic from surface treatment

Photoluminescence response of acrylic (PMMA) and polytetrafluoroethylene (PTFE) to ultraviolet light

Effects of 365 nm UV lamp irradiation of polymethylmethacrylate (PMMA)

Ultra High Molecular Weight Polyethylene: optical features at millimeter wavelengths

Far UV coatings for liquid-Ar time projection chambers

Study of different degradation effects in UV-sensitive polymers using xenon lamp and deuterium lamp to simulate UV irradiation in space environment

Photodegradation mechanisms of tetraphenyl butadiene coatings for liquid argon detectors

Ageing studies of TPB in noble gas detectors for dark matter and neutrinoless ββ decay searches

A practical approach of high precision U and Th concentration measurement in acrylic

Molecular Simulation Strategies for Understanding the Degradation Mechanisms of Acrylic Polymers

Reflectance dependence of polytetrafluoroethylene on thickness for xenon scintillation light

$^{222}$Rn contamination mechanisms on acrylic surfaces

Influence of UV Radiation on Mechanical Properties of Polymer Optical Fibers

Moisture Absorption and Desorption in a UV Cured Urethane Acrylate Adhesive Based on Radiation Source

Measurement of high-pressure xenon gas absorption in acrylic

Degradation Behavior and Damage Mechanisms of CCD Image Sensor With Deep-UV Laser Radiation

Differences in the Residual Behavior of a Bumetrizole-Type Ultraviolet Light Absorber during the Degradation of Various Polymers