Abstract:This paper presents an analysis of the mechanical properties of different polymer optical fibers (POFs) at ultraviolet (UV) radiation conditions. Cyclic transparent optical polymer (CYTOP) and polymethyl methacrylate (PMMA) optical fibers are used in these analyses. In this case, the fiber samples are irradiated at the same wavelength, pulse time and energy conditions for different times, namely, 10 s, 1 min, 2 min and 3 min. The samples are tested in tensile tests and dynamic mechanical thermal analysis (DMTA) to infer the variation in the static and dynamic properties of such fibers as a function of the UV radiation condition. Furthermore, reference samples of each fiber (without UV radiation) are tested for comparison purposes. The results show a lower UV resistance of PMMA fibers, i.e., higher variation in the material features in static conditions (Young's modulus variation of 0.65 GPa). In addition, CYTOP fiber (material known for its high UV resistance related to its optical properties) also presented Young's modulus variation of around 0.38 GPa. The reason for this reduction in the moduli is related to possible localized annealing due to thermal effects when the fibers are subjected to UV radiation. The dynamic results also indicated a higher variation in the PMMA fibers storage modulus, which is around 30% higher than the variations in the CYTOP fibers when different radiation conditions are analyzed. However, CYTOP fibers show a smaller operational temperature range and higher variation in the storage modulus as a function of the temperature when compared with PMMA fibers. In contrast, PMMA fibers show higher variations in their material properties when subjected to oscillatory loads at different frequency conditions. Thus, the results obtained in this work can be used as guidelines for the influence of UV radiation in POFs not only for the material choice, but also on the limitations of UV radiation in the fabrication of the grating as well as in sensor applications at UV radiation conditions.

Effects of 365 nm UV lamp irradiation of polymethylmethacrylate (PMMA)

Optical properties (uv-vis and ftir) of gamma irradiated polymethyl methacrylate (pmma)

Modification of polymethylmethacrylate under irradiation of the SEM electron beam

Influence of UV Radiation on Mechanical Properties of Polymer Optical Fibers

Study Effect Alpha Irradiation with Annealing on Chemical - Optical Properties of Poly (methyl methacrylate) Films

Study of different degradation effects in UV-sensitive polymers using xenon lamp and deuterium lamp to simulate UV irradiation in space environment

Investigation of the Impact of Chemical Modifications on the Photostability of Polymethyl Methacrylate

Differences in the Residual Behavior of a Bumetrizole-Type Ultraviolet Light Absorber during the Degradation of Various Polymers

Vacuum Ultraviolet Photolysis of Hydrocarbon Polymers

Modification Induced by Gamma Irradiation in Polystyrene/Poly(methyl methacrylate) Blends

Effects of selected solvents on PMMA after prolonged exposure: unilateral NMR and ATR-FTIR investigations

Dynamics of the Degradation of Polylactide-Natural Rubber Films under the Influence of UV-Irradiation

The effects of UVC irradiation on the properties of thermoplastics

Effects in Ultrafast Laser Micromachining PMMA-based Optical Fibre Grating

Photodegradation of polylactic acid: Characterisation of glassy and melt behaviour as a function of molecular weight

Study on Surface Fluorinating for Reducing Attenuation of Polymethyl Methacrylate Polymer Optic Fiber

Effect of Ion Etching on Polymethyl Methacrylate Surface

Influence of Substrate Temperature on the Molecular Structure of Pmma Films Deposited by Pulsed Laser Deposition

The Effects of Ozone Sterilization on the Chemical and Mechanical Properties of 3D-Printed Biocompatible PMMA

Property investigation of surface-modified MMT on mechanical and photo-oxidative degradation of viton rubber composites

Investigations of the Behavior for PQ-PMMA Material Post-Exposure