Abstract:Besides conventional structuring processes such as turning, milling or photo-chemical etching, laser processes are increasingly being used for surface structuring of metals. These laser processes differ fundamentally in that structuring is carried out either by material removal or by material redistribution. In this study, a new hybrid process of material ablation by means of pulsed laser radiation and material redistribution based on a remelting process by means of cw laser radiation is experimentally investigated. Besides an introduction to this new hybrid process, we give a detailed description of the equipment and methods used as well as surface structures produced on Ti6Al4V. A melt pool was generated on a prepared Ti6Al4V surface using cw laser radiation with a laser beam diameter of 520 mu m, laser power of 220 W, and a scanning velocity of 100 mm/s. In order to create surface structures, simultaneously, superimposed pulsed laser radiation with a laser beam diameter of 65 mu m, pulse duration of 60 ns, a maximum pulse energy of 0.35 mJ, and a pulse frequency of 50 kHz was used to evaporate small amounts of molten material from the melt pool. This localized evaporation of molten material is assumed to create vapor pressure that deforms the melt pool surface and therefore leads to surface structures. Our results indicate that by pulsed laser radiation capillary surface waves with a wavelength of the doubled laser beam diameter are excited on the melt pool surface. This forced excitation of capillary surface waves result in surface structures that are analyzed after solidification by means of white light interferometry. Based on this analysis we derived an oscillation frequency of v = 2.27 (+/- 0.16) kHz for the excited capillary surface wave as well as an effective kinematic viscosity of mu= 0.1328 cm(2)s(-1) for the damping of this surface oscillation during solidification. In terms of structural features, we achieved surface structures with heights of up to 100 mu m. Furthermore, structure height controllably scales in dependence on pulse energy and number of laser pulses as long as no ejection of molten material takes place. Finally, a comparison of the redistributed material volume per time shows that we achieved a volume redistribution rate of 28.37 mm(3)/min, which is significantly bigger than has been achieved with other laser texturing techniques so far and demonstrates the high potential of this new hybrid technique not only for surface structuring purposes.

Fundamentals of Scanning Surface Structuring by Ultrashort Laser Pulses: From Electron Diffusion to Final Morphology

Real-space observation of surface structuring induced by ultra-fast-laser illumination far below the melting threshold

Micron-scale Modifications Ofsisurface Morphology by Pulsed-Laser Texturing

Tailoring Sub-micrometer Periodic Surface Structures via Ultrashort Pulsed Direct Laser Interference Patterning

Tailoring surface topographies on solids with Mid-IR femtosecond laser pulses

Experimental Investigation on a New Hybrid Laser Process for Surface Structuring by Vapor Pressure on Ti6Al4V

Towards obtaining high-quality surfaces with nanometric finish by femtosecond laser ablation: A case study on coppers

Combination of short and ultrashort pulse laser processing for productive large scale structuring of 3D plastic mould steel

Advances in ultrafast laser structuring of materials at the nanoscale

Metal surface structuring with spatiotemporally focused femtosecond laser pulses

Ultrafast laser-induced morphological transformations

Investigating and understanding the effects of multiple femtosecond laser scans on the surface topography of metallic specimens

Combined Experimental and Theoretical Study of Femtosecond Laser Based Micro/Nano Machining of Ultra Thin Metallic Films

Surface structures induced by ultrashort laser pulses: Formation mechanisms of ripples and grooves

Ultrafast laser induced surface modification in absence of non-thermal melting and evaporation

In-situ observation of the formation of laser-induced periodic surface structures with extreme spatial and temporal resolution

Surface Nanostructuring by Nano-/Femtosecond Laser-Assisted Scanning Force Microscopy

Micro/nanoengineering of functionalized metal surfaces based on short/ultra-short-pulsed lasers: a review

(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering

Evolution of Microstructures on Stainless Steel induced by Ultra-Short Laser Ablation

High resolution scanning microanalysis on material surfaces using UV femtosecond laser induced breakdown spectroscopy