Abstract:A WB‐doped single‐crystalline LiNi0.83Co0.07Mn0.1O2 (SNCM) cathode synthesized through an easy‐to‐implement preparation process exhibits a stable internal structure, robust interface, and excellent electrochemical performance. The study demonstrates a new way to broaden the use high energy density Ni‐rich cathodes for electric vehicles. Transition metal doped LiNiO2 layered compounds have attracted significant interest as cathode materials for lithium‐ion batteries (LIBs) in recent years due to their high energy density. However, a critical issue of LiNiO2‐based cathodes is caused particularly at highly delithiated state by irreversible phase transition, initiation/propagation of cracks, and extensive reactions with electrolyte. Herein, a tungsten boride (WB)‐doped single‐crystalline LiNi0.83Co0.07Mn0.1O2 (SNCM) cathode is reported that affectively addresses these drawbacks. In situ/ex situ microscopic and spectroscopic evidence that B3+ enters the bulk of the SNCM, enlarging the interlayer spacing, thus facilitating Li+ diffusion, while W3+ forms an amorphous surface layer consisting of LixWyOz (LWO) and LixByOz (LBO), which aids the construction of a robust cathode‐electrolyte interphase (CEI) film, are shown. It is also shown that WB doping is effective in controlling the degree of the c‐axis contraction and release of oxygen‐containing gases at high voltages. The best doping concentration of WB is 0.6 wt.%, at which the capacity retention rate of the SNCM reaches 93.2% after 200 cycles at 2.7–4.3 V, while the morphology and structure of the material remain largely unchanged. The presented modification strategy offers a new way for the design of new stable SNCM cathodes for high‐energy‐density LIBs.

Enabling ultra-fast charging for Ni-rich LiNi0.88Co0.09Mn0.03O2 cathode by bulk W-doping

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

W Modification of Nickel-Rich Ternary Cathode Material for Efficient Lithium-Ion Batteries

Revealing the Role of W-Doping in Enhancing the Electrochemical Performance of the LiNi0.6Co0.2Mn0.2O2 Cathode at 4.5 V

Enhancing cycle life of LiNi0.95Co0.04Mn0.01O2 cathode by bulk W-doping and surface Co-doping

W doping improves the electrochemical performance of LiNi0.94Co0.04Al0.02O2 cathode through dual enhanced electronic and ionic conductivities: A study from DFT calculations and experimental results

Enhancing the Electrochemical Performance of Ni-Rich LiNi0.88Co0.09Al0.03O2 Cathodes through Tungsten-Doping for Lithium-Ion Batteries

Na/W co-doping enhances the electrochemical performance of Li-rich Mn-based cathode through improved electronic conductivity and promoted cationic migration

W-Doped LiNi1/3Co1/3Mn1/3O2with Excellent High-Rate Performance Synthesized Via Hydrothermal Lithiation

Tungsten Boride Stabilized Single‐Crystal LiNi0.83Co0.07Mn0.1O2 Cathode for High Energy Density Lithium‐Ion Batteries: Performance and Mechanisms

Tungsten and Phosphate Polyanion Co-Doping of Ni-ultrahigh Cathodes Greatly Enhancing Crystal Structure and Interface Stability

Modification study of Mg/W-doped LiNi0.9Mn0.1O2 layered oxide cathode materials for lithium-ion batteries

Investigation of W6+-doped in high-nickel LiNi0.83Co0.11Mn0.06O2 cathode materials for high-performance lithium-ion batteries

Dual-Functional Tungsten Boosted Lithium-Ion Diffusion and Structural Integrity of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes for High Performance Lithium-Ion Batteries

Optimising the electrochemical properties of LiNi<sub>0.83</sub>Co<sub>0.11</sub>Mn<sub>0.06</sub>O<sub>2</sub> via WO<sub>3</sub> coating and partial W<SUP>6+</SUP> doping through surface pores

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Atomic Horizons Interpretation on Enhancing Electrochemical Performance of Ni-Rich NCM Cathode via W Doping: Dual Improvements in Electronic and Ionic Conductivities from DFT Calculations and Experimental Confirmation.

High-efficiency Mo Doping Stabilized LiNi0.9Co0.1O2 Cathode Materials for Rapid Charging and Long-Life Li-ion Batteries

Synthesis of LiNi0.9Co0.05Mn0.05O2 and modification with co-doping of Zr4+ and W6+ using acid leaching solution from spent lithium-ion batteries

Grain Morphology and Microstructure Control in High‐Stable Ni‐Rich Layered Oxide Cathodes

Slightly Li-enriched chemistry enabling super stable LiNi0.5Mn0.5O2 cathodes under extreme conditions