Abstract:Surging demand for high-energy-density cathodes based on Li(Ni x Co y Mn 1− x − y )O 2 (NCM) and Li(Ni x Co y Al 1− x − y )O 2 (NCA) for LIBs for EVs has tripled the price of Co in three years. As the price of Co rises rapidly, efforts to remove Co from the cathodes are increasing, but Co, even in minute amounts, plays an essential role in maintaining rate capability and structural stability while reducing cation mixing. 1 So the realization of high-performance, Co-free layered cathodes poses a serious technical challenge. Recently, LiNi 0.9 Mn 0.1 O 2 (NM90) was proposed as an alternative Ni-rich, Co-free cathode material. 2 Although the long-term cycling stability of the NM90 is acceptable, its capacity is substantially less than that of a LiNi 0.9 Co 0.05 Mn 0.05 O 2 (NCM90) when the NM90 is charged to a standard operating voltage (4.3 V) because the charging ends in the midst of the second hexagonal phase (H2) to the third hexagonal phase (H3) transition. In this study, we investigate to stabilizing the delithiated structure of an NM90 cathode at 4.4 V is proposed, namely, the introduction of a tertiary element into the cathode in combination with the modification of the electrolyte. The introduction of 1mol% Mo into NM90 accompanies increasing in the upper cut-off voltage to 4.4 V (versus Li + /Li) can help realize a half cell, delivering a capacity of 234 mAh g -1 that is comparable to that of NCM with similar Ni contents. The cycling stability of a full cell featuring the Li(Ni 0.89 Mn 0.1 Mo 0.01 )O 2 (Mo–NM90) cathode is enhanced with a modified electrolyte (EF91, EMC:FEC = 9:1); retaining 86% of its initial capacity after 1,000 cycles while providing 880 Wh kg cathode −1 . Mo–NM90 cathode is able to deliver a high capacity with cycling stability suitable for the long service life for electric vehicles at a reduced material cost, furthering the realization of a commercially viable Co-free cathode for LIBs. Reference s : [1] C. Delmas, I. Saadoune, A. Rougier, J. Power Sources, 44 (1993) 595-602. [2] A. Aishova, G.-T. Park, C. S. Yoon, Y.-K. Sun, Adv. Energy Mater. 10 (2019) 1903179.

High-efficiency Mo Doping Stabilized LiNi0.9Co0.1O2 Cathode Materials for Rapid Charging and Long-Life Li-ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Introducing high-valence elements into cobalt-free layered cathodes for practical lithium-ion batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Heightening the long cycling stability and reducing oxygen loss of Li-rich cathode materials by Mo–F Co-doping for half/full lithium-ion batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries

Synergetic effects of Na+-Mo6+ co-doping on layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode for high performance lithium-ion batteries

Surface Engineering of Ni-Rich Cathodes Enables Homogeneous Doping of High-Valence Mo Ions for Li-Ion Batteries

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O2

Trace Doping of Multiple Elements Enables Stable Cycling of High Areal Capacity LiNi0.5Mn1.5O4 Cathode

Nickel-doped Li 2 MoO 4 as a high-performance anode material for rechargeable lithium-ion batteries

Low‐Electronegativity Cationic High‐Entropy Doping to Trigger Stable Anion Redox Activity for High‐Ni Co‐Free Layered Cathodes in Li‐Ion Batteries

High-entropy doping promising ultrahigh-Ni Co-free single-crystalline cathode toward commercializable high-energy lithium-ion batteries

A universal multifunctional dual cation doping strategy towards stabilized ultra-high nickel cobalt-free lithium layered oxide cathode

Transition Metal-Doped Co-Free Layered Cathode for High-Performance Li-Ion Batteries

Pomegranate-like Ti-doped LiNi0.4Mn1.6O4 5 V-class Cathode with Superior High-Voltage Cycle and Rate Performance for Li-ion Batteries

Enhanced structurally stable cathodes by surface and grain boundary tailoring of Ni-Rich material with molybdenum trioxide