Abstract:In order to offer higher average brightness and more stable photon beam, top-up injection mode is scheduled for daily operation in SSRF. Several critical beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely and reliably, and few interlock logics need to be added into machine protection system with top-up mode. Several hardware and software optimizations of beam instrumentation for this purpose will be introduced in this paper. OVERVIEW Shanghai Synchrotron Radiation Facility (SSRF) is a third generation light source, which located at Shanghai, P.R. China. Since December 2012, SSRF has operated in top-up mode for user experiments, which was a milestone of SSRF in facility performance improvements. The topup injections are made continuously at the time interval of about 10 minutes. Each injection cycle takes about 10 seconds and the bunch change uniformity of the 500 bunch train is better than 95%. For the top-up operation, several beam parameters, such as filling pattern, average current, beam lifetime and transfer efficiency, need to be measured precisely. Some extra interlock logics were added into machine protection system. This paper will introduce the details of hardware and software optimizations of beam instrumentation for the purpose above. FILLING PATTERN Bunch charge uniformity control is very important for the top-up operation. The quality mainly depends on the precision of bunch charge & filling pattern measurement. This measurement can be realized by direct sampling BPM pickup signal [1-3] or synchrotron radiation signal [4]. Due to easy configuration and good linearity button, BPM pickups and PXI waveform digitizer based solution have been adopted [5].

Study on the injection beam commissioning software for CSNS/RCS

Study on the injection optimization and transverse coupling for CSNS/RCS

The effects of injection beam parameters and foil scattering for CSNS/RCS

Performance and painting scheme considerations for the CSNS injection

Study on the transverse painting during the injection process for CSNS/RCS

Injection orbit matching for CSNS/RCS

Beam instrumentation system development and commissioning in ssrf

Beam Instrumentation System Optimization for Top-up Operation in SSRF

Study on the magnetic measurement results of the injection system for CSNS/RCS

Applications of programmable trim quadrupoles on beam commissioning for the CSNS RCS

Commissioning and operation of the transverse collimation system at the RCS of CSNS

Preliminary Design of CSNS-II Linac SRF LLRF

Study on transient beam loading compensation for China ADS proton linac injector II

Electron emission of stripping foil and collimation system for CSNS/RCS

The compensation for the edge focusing of chicane bump magnets by harmonic injection in CSNS/RCS

Beam collimation for CSNS/RCS

CSNS-II multi-harmonic LLRF upgrade and commissioning

Design and Implementation of a Compact Control System for Coupled RFQ-SFRFQ Linac

Residual orbit of BC bump for CSNS/RCS

The Improvements at CSNS Ion Source

The beam commissioning of a CW high charge state heavy ion RFQ