Abstract:The neutron flux of the Compact Pulsed Hadron Source (CPHS) is about 2–3 orders of magnitude lower than that of large neutron sources, which means that the beam intensity should be improved to achieve good statistics. Multi-pinhole collimation can be used to obtain a lower Q with an acceptable beam intensity in a very small angle neutron scattering (VSANS) instrument and a higher beam intensity for a larger sample size in a small-angle neutron scattering (SANS) instrument. A new nine-pinhole structure is used in a SANS instrument at CPHS to achieve an acceptable range and resolution of Q and a higher beam intensity compared to single-pinhole collimation. The crosstalk issue associated with multi-pinhole collimation is addressed using an optimized algorithm to achieve a higher safety margin and a larger pinhole size with a higher beam intensity at the sample. Different collimator aperture structures are compared on the basis of their noise production. Experiments are performed to verify the theory of calculating reflection noise from the inner surface of the collimator's aperture and parasitic noise from the beveled collimator structure. From a simulated SANS experiment using cold neutrons in the SANS instrument, it is clarified that multi-pinhole collimators with an opening angle on the downstream side have better performance than those with an opening angle on the upstream side and straight-cut collimators. Compared with a single-pinhole collimation system, a nine-pinhole collimation system increases the intensity at the sample by approximately sevenfold when the sample size is increased by 20-fold for CPHS-SANS, and the signal-to-noise ratio is improved by exploiting a specific collimator aperture structure. Our goal is to install a multi-pinhole collimator based SANS instrument at CPHS in the future, and it is hoped that these results will serve to promote the utilization of multi-pinhole collimation systems at other facilities.

Beam collimation for CSNS/RCS

Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS

Commissioning and operation of the transverse collimation system at the RCS of CSNS

Study on collimation and shielding of the back-streaming neutrons at the CSNS target

Study on the injection beam commissioning software for CSNS/RCS

Applications of programmable trim quadrupoles on beam commissioning for the CSNS RCS

The effects of injection beam parameters and foil scattering for CSNS/RCS

Structure Design of Beam Collimator for Quasi-steady EAST Neutral Beam Injection Device

Design and performance of LLRF system for CSNS/RCS

Preliminary Design of CSNS-II Linac SRF LLRF

Study on the injection optimization and transverse coupling for CSNS/RCS

Beam-loss driven injection optimization for CSNS/RCS

Electron emission of stripping foil and collimation system for CSNS/RCS

Introduction to the Overall Physics Design of CSNS Accelerators

Conceptual Design and Simulation of Neutron Standard Test Beam at CAEP

Beam Measurement System in NSRL

Beam Dump Window Design for CSNS

Design of the Input Power Coupler for Boron Neutron Capture Therapy Drift Tube Linac

Updating the CSNS injector linac to 250 MeV with superconducting double-spoke cavities

Study of a Multi-Pinhole Collimation System Based Small-Angle Neutron Scattering Instrument at the Compact Pulsed Hadron Source