Review of Damage Models for Environmentally Assisted Cracking on Metals

Jorge G. Diaz

DOI: https://doi.org/10.48550/arXiv.2111.05266

2021-11-06

Abstract:Stress corrosion cracking (SCC) is a form of failure in metals that is present mostly in systems where humidity contact and mechanical load play a key role. Therefore, prediction of the combined effect is desired. There are models based on path dissolution and film rupture, Hydrogen-embrittlement, based on empirical observations, and the unified approach which recognizes not the maximum applied stress intensity factor (SIF) but the SIF range as the fatigue driving force. So, in the later one, the contribution of corrosion to crack growth is recognized by adding a corrosion SIF.

Materials Science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: how to accurately predict the crack growth behavior of metallic materials in a corrosive environment, so as to more reliably evaluate and predict the service life of engineering components. Specifically, the article focuses on the phenomenon of Environmentally Assisted Cracking (EAC), especially failure modes such as Stress Corrosion Cracking (SCC), Corrosion Fatigue (CF), and Hydrogen Embrittlement (HE).

### Overview of Main Problems:

1. **Complexity of Crack Growth Behavior in Corrosive Environments**
- In ordinary fatigue tests, approximately 90% of the time is used for crack initiation, and the remaining 10% is used for crack growth.
- In contrast, under corrosion fatigue conditions, crack initiation is accelerated, and a crack can be formed in only 10% of the time, while the remaining time is used for crack growth. Therefore, in corrosion fatigue, the study of crack growth behavior is particularly important.

2. **Limitations of Existing Models**
- Existing research mainly focuses on studying the crack growth rate through "fracture and measurement" experiments, using pre - cracked specimens for testing.
- Although new techniques such as Transmission Electron Microscopy (TEM) and chemical characterization have been introduced, and these methods have provided new insights into EAC, there is currently no widely accepted model that can comprehensively predict crack growth in a corrosive environment.

3. **Factors to Be Considered**
- Crack growth in a corrosive environment usually occurs under conditions lower than the material's critical fracture toughness (\(K_{Ic}\)).
- The critical corrosion stress intensity factor (\(K_{Iscc}\)) can be as low as 1% of \(K_{Ic}\), indicating that the corrosive environment has a significant impact on crack growth.
- Corrosion conditions need to be incorporated into the damage model to more accurately predict the life of components.

4. **Need for a Unified Approach**
- The unified approach aims to provide a comprehensive solution by analyzing the relationship between the crack growth rate and the stress intensity factor range (\(\Delta K\)) and the maximum stress intensity factor (\(K_{max}\)).
- This method recognizes two driving forces for crack growth: permanent plastic deformation (caused by \(\Delta K\)) and crack length increase (caused by \(K_{max}\)).

### Formula Summary:
- **Ford and Andersen Model**
\[
\frac{da}{dN}=\rho M\frac{i_{o,a}}{zF}
\]
where \(\frac{da}{dN}\) is the average crack growth rate, \(M\) is the atomic weight, \(z\) is the oxidation number, \(\rho\) is the density, \(F\) is the Faraday constant, and \(i_{o,a}\) is the matrix metal dissolution rate parameter.

- **Hall Model**
\[
\frac{da}{dN}=\left|\frac{\partial\varepsilon_{ct}}{\partial t}\right|
\]
where \(\frac{da}{dN}\) is the average crack growth rate and \(\varepsilon_{ct}\) is the absolute value of the crack - tip strain rate gradient.

- **Hydrogen Embrittlement Model**
\[
\frac{da}{dN}=C\frac{\sigma_c\varepsilon_{cf,z}}{\varepsilon_{fo}}
\]
where \(r_c\) is the radius of the fracture zone in front of the crack tip, \(\varepsilon_{cf,z}\) is the strain rate in the creep fracture zone, \(\varepsilon_{fo}\) is the fracture strain at the reference hydrogen concentration, \(C_o\) is the reference hydrogen concentration, and \(C_{gb}\) is the hydrogen concentration at the grain boundary.

### Conclusion:
The paper reviews the existing...