Abstract:To address such challenges as an uncertain number of demagnetization poles of the permanent magnet synchronous motor (PMSM) and cases in which the fault cannot be located, this paper proposes a fault identification and location methodology based on the analysis of the motor stator current. First, the influence of the irreversible demagnetization of permanent magnets on the analytical model of the back electromotive force (Back-EMF) of the rotor in a single motor stator slot is analyzed. Moreover, considering the topology of the motor, the influence of the demagnetization fault on the stator phase current and branch current is analyzed. Since the stator phase currents cannot diagnose the partial demagnetization faults of PMSM with some topological structures, the stator branch current is selected as the signal for the identification and localization of the demagnetization fault. Secondly, the demagnetization fault diagnosis and mode recognition of the motor are carried out through the amplitude of the real-time branch current and the harmonic components of the PMSM. A sample database of demagnetization faults is established through calculation and normalization of the residual value of the stator branch current and the branch current of the healthy motor after demagnetization in one pole order. The fault threshold is obtained by analyzing the residual of the branch current of uniform demagnetization and the Pearson correlation coefficient of the fault sample database. Then, the correlation coefficient between the real-time branch current residual value of PMSM and the fault sample database is analyzed, and the number of demagnetization poles and the fault location are determined by the number and location of the calculated correlation coefficient exceeding the threshold. Finally, the feasibility and effectiveness of the proposed method are verified by the finite element analysis (FEA) results.

Impact of Motor Stator Winding Faults on Common-Mode Current

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Experimental Modal Analysis for End Winding Coil of a F4 Three-Phase Synchronous Motor Stator

Influence of Healthy Winding Group Current on Three-Phase Short-Circuit and Demagnetization in Dual Three-Phase Surface-Mounted PM Machines

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Time-frequency Characteristics Research of Common Mode Current in PWM Motor System

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Extraction of Common-Mode Impedance of an Inverter-Fed Induction Motor

Estimation of Common-Mode Current Coupled to the Communication Cable in a Motor Drive System

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Common-Mode Resonance Suppression Strategy in High-Speed Compressor Drive

Impact of Two Types of Grounding on the Common-mode Voltage of Wide-bandgap Motor Drive Systems

Modeling of Common-Mode Impedance of an Inverter-Fed Induction Motor from Online Measurement

Identification of Laminated Core and Winding's Physical Parameters by Stator's Modal Testings

A Comprehensive Investigation of Winding Eddy and Circulating Current Losses of Stator Iron Coreless PMBLDC Motors

Modeling of Interturn Short Fault in Interior Permanent Magnet Synchronous Motors with Multistrand Windings

Demagnetization Fault Detection and Location in PMSM Based on Correlation Coefficient of Branch Current Signals

Research of common-mode voltage elimination for open-end winding AC motor drive system

High-frequency Electric-Motor Modelling for Conducted CM Current Prediction in Adjustable Speed Drive System

Characterizations of PM Synchronous Motor with an Integrated Common-Mode Voltage Filter