Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Experimental Modal Analysis for End Winding Coil of a F4 Three-Phase Synchronous Motor Stator

Transient Analysis Of Synchronous Generator With Stator Winding Faults Based On Starting Process

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Identification of Laminated Core and Winding's Physical Parameters by Stator's Modal Testings

Analysis and Control of Seven-Phase Permanent-Magnet Bearingless Motor with Single Set of Half-Coiled Winding.

Modal disturbance investigation of rod-shaped ultrasonic motor using bending vibrations

Analytical modeling of stator vibration for surface mount permanent magnet brushless motors

Researches on Behavior of Vibration in Axial Flux Permanent Magnet Synchronous Motor

Research on Equivalent Material Properties and Modal Analysis Method of Stator System of Permanent Magnet Motor With Concentrated Winding

Simulation Analysis of Stator Modal of Large-sized and Medium-sized Asynchronous Motors

Study on the Modal Disturbance of Traveling Wave Type Rod Shape Ultrasonic Motor Stators

Low-Order Radial Modal Test and Analysis of Drive Motor Stator

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Principle and simulation of a 5-phase bearingless permanent magnet-type synchronous motor

Modal Analysis of the 1200 MW Turbo-generator Stator End Windings

Analytical method for modal analysis of submerged electric motor stator

Accurate Modal Analysis Method For Automotive Drive Motors Considering Composite Structures And Impregnating Windings In The Design Phase

Research on magnetic field and temperature field of multi-phase SPMSM under winding fault

Analyses of Permanent Magnet DC Motor Stator Vibrations

Coil test analysis of Wound-field three-phase flux switching machine with non-overlapping winding and salient rotor

Research on Electromagnetic Vibration Characteristics of a Permanent Magnet Synchronous Motor Based on Multi-Physical Field Coupling