Abstract:An experimentally-calibrated carbon nanotube compact transistor model has been used here to design two high-frequency (HF) circuits with two different functionalities each: a phase configurable amplifier (PCA) and a frequency configurable amplifier (FCA). The former design involves an in-phase amplifier and an inverting amplifier while the latter design embraces a frequency doubler as well as a distinct inverting amplifier. The specific functionality selection of each of the two HF circuit designs is enabled mainly by the inherent ambipolar feature at a device level. Furthermore, at a circuit level the matching networks are the same regardless the operation mode. In-phase and inverting amplification are enabled in the PCA by switching the gate-to-source voltage (VGS) from -0.3 V to 0.9 V while the drain-to-source voltage (VDS) remains at 3 V. By designing carefully the matching and stability networks, power gains of 4.5 dB and 6.7 dB at 2.4 GHz for the in-phase and inverting operation mode have been achieved, respectively. The FCA, in its frequency doubler operation mode, exhibits 20 dBc of fundamental-harmonic suppression at 2.4 GHz when an input signal at 1.2 GHz is considered. This frequency doubler functionality is enabled at VGS=0.3 V, whereas at VGS=0.9 V amplification of 4.5 dB is obtained while VDS remains at 3 V in both cases. In both configurable circuits the stabilization and matching networks are the same regardless the bias-chosen operation mode. The circuits performance degradation due to metallic tubes in the device channel is studied as well as the impact of non-ideal inductors in each design. PCA and FCA operation modes are further exploited in high-frequency modulators.

A Multifunctional Sub-10nm Transistor

Field-effect BJT: an adaptive and multifunctional nanoscale transistor

Aligned carbon nanotube integrated circuit downsizing toward a sub-10 nm node

A Novel Nanosheet Reconfigurable Field Effect Transistor with Dual-Doped Source/drain

Multifunctional Reconfigurable Operations in an Ultra-Scaled Ferroelectric Negative Transconductance Transistor

Multifunctional high-frequency circuit capabilities of ambipolar carbon nanotube FETs

Multiple Functionality in Nanotube Transistors

A Junctionless Nanowire Transistor with a Dual-Material Gate

The SCC BJT: a high-performance bipolar transistor compatible with high-density deep-submicrometer BiCMOS SRAM technologies

A low power high bandwidth four quadrant analog multiplier in 32 nm CNFET technology

Configurable Multifunctional Integrated Circuits Based On Carbon Nanotube Dual-Material Gate Devices

A metal/oxide tunneling transistor

Double‐Gate MoS 2 Field‐Effect Transistors with Full‐Range Tunable Threshold Voltage for Multifunctional Logic Circuits

The future transistors

Double‐Gate MoS2 Field‐Effect Transistors with Full‐Range Tunable Threshold Voltage for Multifunctional Logic Circuits

A Resonant Tunneling Nanowire Field Effect Transistor with Physical Contractions: A Negative Differential Resistance Device for Low Power Very Large Scale Integration Applications

N-P-N Bipolar Action in Junctionless Nanowire TFET: Physical Operation of a Modified Current Mechanism for Low Power Applications

Novel Mixed-Dimensional hBN-Passivated Silicon Nanowire Reconfigurable Field Effect Transistors: Fabrication and Characterization

Nanoscale Vacuum Channel Transistor

A Semi-Floating Gate Transistor with Enhanced Embedded Tunneling Field-Effect Transistor

Cost-Effective Integrated RF Power Transistor in 0.18- $muhboxm$ CMOS Technology