Abstract:Purpose: Several attempts to determine the transit time of a high dose rate (HDR) brachytherapy unit have been reported in the literature with controversial results. The determination of the source speed is necessary to accurately calculate the transient dose in brachytherapy treatments. In these studies, only the average speed of the source was measured as a parameter for transit dose calculation, which does not account for the realistic movement of the source, and is therefore inaccurate for numerical simulations. The purpose of this work is to report the implementation and technical design of an optical fiber based detector to directly measure the instantaneous speed profile of a 192Ir source in a Nucletron HDR brachytherapy unit. Methods: To accomplish this task, we have developed a setup that uses the Cerenkov light induced in optical fibers as a detection signal for the radiation source moving inside the HDR catheter. As the 192Ir source travels between two optical fibers with known distance, the threshold of the induced signals are used to extract the transit time and thus the velocity. The high resolution of the detector enables the measurement of the transit time at short separation distance of the fibers, providing the instantaneous speed. Results: Accurate and high resolution speed profiles of the 192Ir radiation source traveling from the safe to the end of the catheter and between dwell positions are presented. The maximum and minimum velocities of the source were found to be 52.0 +/- 1.0 and 17.3 +/- 1.2 cm/s. The authors demonstrate that the radiation source follows a uniformly accelerated linear motion with acceleration of [a] = 113 cm/s2. In addition, the authors compare the average speed measured using the optical fiber detector to those obtained in the literature, showing deviation up to 265%. Conclusions: To the best of the authors' knowledge, the authors directly measured for the first time the instantaneous speed profile of a radiation source in a HDR brachytherapy unit traveling from the unit safe to the end of the catheter and between interdwell distances. The method is feasible and accurate to implement on quality assurance tests and provides a unique database for efficient computational simulations of the transient dose.

Dosimetric characterization of a new 192Ir pulse dose rate brachytherapy source with the Monte Carlo simulation and thermoluminescent dosimeter

Thermoluminescent and Monte Carlo dosimetry of a new 170Tm brachytherapy source

Monte Carlo-aided dosimetry of a new high dose-rate brachytherapy source

Investigation of Dosimetric Parameters of $^{192}$Ir MicroSelectron v2 HDR Brachytherapy Source Using EGSnrc Monte Carlo Code

Monte Carlo simulations and radiation dosimetry measurements of 142Pr capillary tube-based radioactive implant (CTRI): a new structure for brachytherapy sources

Monte Carlo Simulation Study of Dosimetric Parameters of Varian HDR 192 Ir Source

Monte Carlo Dosimetry of a New (90)Y Brachytherapy Source.

The Measurement of the Air-Kerma Rate in Air and a Solid Phantom with Ionization Chambers for a 192ir HDR Brachytherapy Source

Monte Carlo Simulation of Radiated Seed Source Brachytherapy

EP-1387: Thermoluminescent Dosimetry of the Model BT-125-1 125I Interstitial Brachytherapy Seed

Monte Carlo Calculations of the Dosimetry Parameters for the 125I Brachytherapy Source

Dosimetry of a China-made 192ir Wire Source

High dose rate 192 Ir brachytherapy source model Monte Carlo dosimetry: mHDR-v2 and mHDR-v2r

Dosimetry assessment of patient-specific 3D printable materials for HDR surface brachytherapy

Dosimetric performance of a multi-point plastic scintillator dosimeter as a tool for real-time source tracking in high dose rate brachytherapy

Direct measurement of instantaneous source speed for a HDR brachytherapy unit using an optical fiber based detector

Dosimetry characterization of $^{32}$P intravascular brachytherapy source wires using Monte Carlo codes PENELOPE and GEANT4

Calculations of beta radiation doses from multiwell Phosphorus-32 and Yttrium-90 applicators designed to be used in the treatment of superficial skin tumors: comparison of Monte Carlo and analytical methods

Determination of Dose Calculation Parameters of 125Ⅰ Brachytherapy Source with Monte-Carlo Method

Dosimetric evaluation of a novel modular cell irradiation platform for multi-modality in vitro studies including high dose rate brachytherapy

Characterization of a fiber-coupled Al2O3:C luminescence dosimetry system for online in vivo dose verification during 192Ir brachytherapy