Abstract:Background: Sophisticated modern radiation therapy treatments require comprehensive validation in 3D. Purpose: Investigation and characterization of a novel 3D dosimetry system consisting of ClearView radiochromic gel dosimeters (commercially available from Modus Inc) and an in-house telecentric optical CT scanner DLOS (the Duke Large Field of View Optical-CT Scanner). Methods: Spectrophotometry measurements were made on small volumes of ClearView gel irradiated with 6X photon doses up to 40 Gy to determine linearity and temporal stability of dose response. Clinical evaluation of Clearview/DLOS system was conducted in two phases. Phase one involved simple photon and electron benchmark irradiations, delivered to 15 and 10 cm diameter dosimeters, at various energies and doses. Phase 2 investigated application to the verification of two single isocenter multi-target (SIMT) stereotactic radiosurgery (SRS) deliveries. These were patient treatments for two and five brain lesions, respectively, and delivered to 15 cm diameter dosimeters. SIMT treatments were delivered by Varian TrueBeam 6X with doses of 40 Gy. For dose read-out, dosimeters were optically scanned in the DLOS both pre- and post- irradiation (within 24 h). 3D reconstructions (1 mm3 resolution) of the change in linear-optical- attenuation (proportional to dose) was obtained using in-house software and 3D Slicer. Measured and predicted (Eclipse TPS) doses were compared through percent depth-dose (PDD), cross plane and in-plane profiles, and relative 3D gamma analysis (performed at a range of 7%/4 mm down to 2%/2 mm). Regions of known artifacts were excluded from analysis (jar base, neck, and wall). The SIMT SRS deliveries were additionally compared to SciMoca, an independent Monte Carlo second check software. Results: Linearity of dose response was confirmed with R2 ≥ 0.9986 at both 520 and 630 nm wavelengths and at three post-irradiation time points: 21 h, 6 and 10 days. Dose profiles of all benchmark irradiations, in both 15 and 10 cm dosimeters, show good agreement in useable areas of the gel compared to Eclipse dose calculations, with root mean square errors (RMSE) ≤ 0.0054, and R2 ≥ 0.9808. Gamma pass rates for the 15 cm dosimeter benchmark irradiations were ≥ 94% at 2%/2 mm (central axis), ≥ 90% at 3%/3 mm (left lateral), ≥ 90% at 2%/2 mm (electron), and ≥ 94% at 3%/2 mm (stacking field). Similar high passing rates were observed for benchmark irradiations to the smaller 10 cm diameter dosimeters. Very high Gamma pass rates were found for SIMT SRS deliveries, with 99.82% and 97.80% at 3%/2 mm, for the two and five target plans, respectively. Conclusion: This work presents the first investigation of ClearView dosimeters in combination with a telecentric optical-CT scanner (DLOS). Simple benchmark irradiations demonstrate ClearView/DLOS can accurately recreate and measure relative 3D dose within non-artifact regions (i.e., > 1 cm away from walls). Application to SIMT SRS deliveries demonstrated the viability of the system as a means for comprehensive 3D verification of complex treatment deliveries as well as confirming the treatment planning system dose distribution. The results indicate that DLOS/ClearView system is a highly effective 3D verification tool for SIMT irradiations and can be applied with 3%/2 mm gamma criteria where passing rates of > 95% are to be expected.

Feasibility of using micro silica bead TLDs for in-Vivo dosimetry of CT-based HDR prostate brachytherapy: An experimental and simulation study

3D in vivo dosimetry of HDR gynecological brachytherapy using micro silica bead TLDs

Dosimetry assessment of patient-specific 3D printable materials for HDR surface brachytherapy

Dosimetric performance of a multi-point plastic scintillator dosimeter as a tool for real-time source tracking in high dose rate brachytherapy

Feasibility of determining external beam radiotherapy dose using LuSy dosimeter

Investigation of the 106 Ru Ophthalmic Plaque Dose Distribution in a Pseudotumor-Contained Eye-Equivalent Phantom by Silica Glass Beads Ru-106 ophthalmic plaque dosimetry by Silica glass beads

Evaluation Of The Dosimetric Impact Of Interfractional Anatomical Variations On Prostate Proton Therapy Using Daily In-Room Ct Images

Brachytherapy treatment verification using gamma radiation from the internal treatment source combined with an imaging panel-a phantom study

Dosimetric evaluation of a novel modular cell irradiation platform for multi-modality in vitro studies including high dose rate brachytherapy

Feasibility of 4D HDR brachytherapy source tracking using x‐ray tomosynthesis: Monte Carlo investigation

Establishing a fingerprinting method for fast catheter identification in HDR brachytherapy in vivo dosimetry

Dosimetry of microbeam radiotherapy by flexible hydrogenated amorphous silicon detectors

Investigation of a 3D dosimetry system utilizing radio-chromic gel and telecentric optical-CT readout

Thermoluminescent and Monte Carlo dosimetry of a new 170Tm brachytherapy source

Assessment of peripheral dose as a function of distance and depth from cobalt-60 beam in water phantom using TLD-100

Characterization of a fiber-coupled Al2O3:C luminescence dosimetry system for online in vivo dose verification during 192Ir brachytherapy

Time-resolved clinical dose volume metrics, calculations and predictions based on source tracking measurements and uncertainties to aid treatment verification and error detection for HDR brachytherapy – a proof-of-principle study

Design and Characterization of a Novel Scintillator Array for In Vivo Monitoring During UHDR PBS Proton Therapy

Deep learning for high-resolution dose prediction in high dose rate brachytherapy for breast cancer treatment

Seven-probe scintillator dosimeter for treatment verification in HDR-brachytherapy

3D source tracking and error detection in HDR using two independent scintillator dosimetry systems