Abstract:Introduction. Products containing WC-Co cemented tungsten carbides are commonly used in various industries. It is often operates at elevated temperatures, at which, as noted in the literature, tungsten carbides are susceptible to severe oxidation in air. However, no sufficiently accurate values of oxidation temperatures and dependence of these temperatures and the oxidation rate of tungsten carbides on the cobalt content with its wide variation have been established. The subject of the study is the oxidation process of WC-Co cemented tungsten carbides. The purpose of the work is to obtain the oxidation temperatures of WC-Co cemented tungsten carbides with different cobalt content by weight in the range of 3–20 %. Methods. The dynamics of oxidation was studied in air. Specimens of the same length were heated to a temperature of 850 °C and cooled at the same rate in the furnace of a push-rod dilatometer Netzsch 402 PC while its expansion was simultaneously recorded. The oxidation rate of the specimens was determined by the difference in its length before heating and after cooling. The values of oxidation temperatures were obtained by mathematical analysis of relationships of the expansion on temperature. Results and discussion. Experimental dependences of expansion of WC-Co cemented tungsten carbides on temperature in the range from 20 to 850 °C, and for WC-8Co – up to 1,150 °C, were obtained. The oxidation rate of WC-Co cemented tungsten carbides increased linearly with increasing concentration of tungsten carbides (decreased with increasing cobalt content). During heating, two characteristic temperatures were identified: the onset of oxidation (631±4 °C) and the transition to active oxidation (804±11 °C). The established temperatures were the same for different ratios of tungsten carbides and cobalt. The results can be used when choosing temperature conditions for products made from WC-Co cemented tungsten carbides.

Influence of Temperature in Barothermal Treatment of Sintered Cemented Carbides on the Evolution of Their Structure and Properties

Change of Microstructure and Properties of WC–Co Cemented Carbides as a Result of High Pressure and Temperature

The Effect of Cryogenic Treatment on Microstructure and Properties of WC–Co Cemented Carbides

Oxidation temperatures of WC-Co cemented tungsten carbides

Effect of Particle Size and Vacuum Sintering Temperature on Phase Composition and Mechanical Properties of WC-12 Wt% Co Hardmetals

Effects of Sinter-HIP Temperature on Microstructure and Properties of WC–12Co Produced Using Binder Jetting

Influence of Deep Cryogenic Treatment on Microstructures and Mechanical Properties of an Ultrafine-Grained WC-12Co Cemented Carbide

TEM Investigation of WC-Co Cemented Carbides after Heat Treatment

Effect of heat treatment on the structural properties of tungsten carbide coatings deposited by RF magnetron sputtering

Enhanced high temperature mechanical properties of WC-Co cemented carbides by VC addition

Microstructure evolution and its impact on mechanical properties of a cobalt-based superalloy subjected to long-term heat-treatments

Preparation of WC-Co Cemented Carbide by Spark Plasma Sintering: Microstructure Evolution, Mechanical Properties and Densification Mechanism

Microstructure and properties of WC-12Co cemented carbide fabricated via selective electron beam melting

High-temperature Mechanical Behavior of Ultra-Coarse Cemented Carbide with Grain Strengthening

Influence of Isothermal Heating on the Curie Temperature of FeCoB Bulk Amorphous Alloy

Effect of Cold Isostatic Pressing and VC Grain Growth Inhibitor Addition on WC Grain Size and Mechanical Properties of WC-8Co Cemented Carbide

Effects of Lower Cobalt Binder Concentrations in Sintering of Tungsten Carbide

Low temperature pressureless immediate sintering of novel nanostructured WC/Co/NiCrSiB-alloy cemented carbide

Effect of heat treatment on microstructure and properties of WC reinforced co-based composite coating on copper

Effect of carbon content on the microstructure and properties of Cr-doped WC–15Co cemented carbide

Fabrication of WC-12Co cemented carbide by microwave sintering