Abstract:Transition metal boride enable applications in fields of cutting tools as the hard phase, but their fabrication suffers from shortcomings in high temperature for binary and hard/soft phase balance. Here, we leveraged a WCoB-Co cermets prepared by using elemental powders of W, Co and B powders via in situ synthesis method and investigated the microstructure evolution of a composite structure of WCoB/Co. The phase evolution, microstructure evolution and mechanical properties were investigated using X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The complete sintering process consist of three solid-phase reaction stages and one liquid-phase sintering stage. The solid-phase reaction stage includes the following three reactions: B + 2Co → Co2B, 11 W +15 Co2B → 9WCoB + W2Co21B6, and 14 W + 2W2Co21B6 → 12WCoB + 23Co + Co7W6. The eutectic liquid phase, essential for the densification, forms at 1323 °C. The Rockwell hardness and density value reach 87.5HRA and 12.11 g/cm3, respectively. At 1380 °C, the traverse rupture strength (TRS) reaches the peak value of 1495 MPa. Moreover, the results show that transgranular fracture is the main fracture mode. The densification stage was completed at ~1400 °C. In particular, Co7W6 phase was discovered during the study of the evolution of WCoB-Co cermets. An increase of the B content was found to be beneficial to eliminate the Co7W6 phase that proved to be detrimental to mechanical properties.

Microstructure and properties of WC-12Co cemented carbide fabricated via selective electron beam melting

Microstructure and properties of coarse WC-10CoCrFeMnNi cemented carbide by mechanical alloying and hot pressing sintering

Microstructure and mechanical properties of WC-12Co cemented carbide fabricated by laser powder bed fusion on a WC-20Co cemented carbide substrate

Influence of Deep Cryogenic Treatment on Microstructures and Mechanical Properties of an Ultrafine-Grained WC-12Co Cemented Carbide

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

Microstructure, Mechanical Properties and Wear Behaviors of Ultrafine-Grain WC-Based Cermets with Different Binder Phases Fabricated by Spark Plasma Sintering

Preparation of Ultra-Fine WC-Co Cermet and Its Wear Behavior

Role of Co Content on Densification and Microstructure of WC–Co Cemented Carbides Prepared by Selective Laser Melting

Preparation of WC-Co Cemented Carbide by Spark Plasma Sintering: Microstructure Evolution, Mechanical Properties and Densification Mechanism

Tensile and Fatigue Characteristics of WC-20wt%Co Cemented Carbide with Sintering Methods

Fabrication of WC-12Co cemented carbide by microwave sintering

TEM Investigation of WC-Co Cemented Carbides after Heat Treatment

The Effect of Cryogenic Treatment on Microstructure and Properties of WC–Co Cemented Carbides

Microstructure Evolution in the Cemented Carbides Wc-Coi. Effect of the C/W Ratio on the Morphology and Defects of the Wc Grains

Microstructure and Mechanical Properties of WC-10wt.%AlCoCrFeNi Cemented Carbides Fabricated by Plasma-Assisted Ball Milling

Effect of Particle Size and Vacuum Sintering Temperature on Phase Composition and Mechanical Properties of WC-12 Wt% Co Hardmetals

Microstructure and wear resistance of bimodal cemented carbide coating prepared by direct laser powder deposition

Microstructure Evolution of WC-20Co Cemented Carbide During Direct Selective Laser Melting

Microstructure and properties of WC-Co/CrMnFeCoNi composite cemented carbides

Microstructural Characterization of Nanostructured WC-Co Cemented Carbides

Tracking the evolution of microstructure and phases of WCoB-Co cermets during sintering