Abstract:In this paper, a line-scanning irradiation of <0001> 6H-SiC single crystal by a femtosecond laser focus was implemented for laser fluence of 2.2 J/cm 2 at different scanning velocities from 1000 down to 100 μm/s. The morphology of the obtained ablation lines characterized by a scanning electron microscope shows that there progressively appear three-level ripples with average period of about 222, 600 nm and that between them. Possible formation mechanisms for these three-level ripples were analyzed by numerical simulation employing finite-difference time-domain method (FDTD). Analysis shows that as Obara proposed, the interference of incident wave with the wave scattered by scratches possibly left by fine polishing is the most possible reason for inducing 222 nm-period and 600 nm-period ripples. Main discussions were focused on the orientation characteristics of ripples. Both isolated scratches and crossed scratches with different orientation angles were considered for evaluating their role in field redistribution. The detailed simulations indicate that for scratches oriented 90° with respect to laser polarization generate a pair of strongest ripple-like optical field enhancement compared to scratches with other orientation angles. It is these advantages of 90°-oriented scratch in field enhancement that make the final ripple perpendicular to laser polarization most competitive and finally left on the surface. This complements the physical picture of Obara et al. in terms of their negligence in addressing the orientation characteristics of ripples. Further FDTD simulation of the interaction of incident wave with as-formed 600 nm-period ripples shows that the optical field enhancement located between any two adjacent 600 nm-period ripples is the driving force for splitting 600 nm-period ripples into the third ripples with period between 222 and 600 nm.

Large-area commercial-grating-quality subwavelength periodic ripples on silicon efficiently fabricated by gentle ablation with femtosecond laser interference via two cylindrical lenses

Fabrication of highly homogeneous and controllable nanogratings on silicon via chemical etching-assisted femtosecond laser modification

Sub-wavelength Ripple Formation on Silicon Induced by Femtosecond Laser Radiation

Deepening of nanograting structures on Si by a two-step laser spatial-selective amorphization strategy combined with chemical etching

Fabrication of Nanostructures on Silicon Carbide Surface and Microgroove Sidewall Using 800-Nm Femtosecond Laser

Direct Writing of Sub-Wavelength Ripples on Silicon Using Femtosecond Laser at High Repetition Rate

Cylindrically Focused Nonablative Femtosecond Laser Processing of Long‐Range Uniform Periodic Surface Structures with Tunable Diffraction Efficiency

Super-regular femtosecond laser nanolithography based on dual-interface plasmons coupling

Butterfly-Inspired 2 D Periodic Tapered-Staggered Subwavelength Gratings Designed Based on Finite Difference Time Domain Method

Fabrication of Grating Structures on Silicon Carbide by Femtosecond Laser Irradiation and Wet Etching

Coalescence and dislocation of laser induced periodic ripples on silicon by double time delayed femtosecond laser beams

Fabrication of Two-Dimensional Periodic Structures on Silicon after Scanning Irradiation with Femtosecond Laser Multi-Beams

Analysis of High-Order Surface Gratings Based on Micron Lasers on Silicon

Laser Assisted Surface Conditioning of a Residual Pattern on Single Crystal Silicon Induced by Ultra-Precision Cutting

Fabrication of Large Grating by Monitoring the Latent Fringe Pattern

Direct Writing of 150 Nm Gratings and Squares on ZnO Crystal in Water by Using 800 Nm Femtosecond Laser

The Three-Level Ripples Induced by Femtosecond Laser on a 6H-Sic Single Crystal and the Formation Mechanism

Nanogratings fabricated by wet etching assisted femtosecond laser modification of silicon for surface plasmon resonance sensing

Cross-scale Fabrication of Diffraction Grating Based on Self-Rebound Properties of Flexible Substrate

Low-cost lithography for fabrication of one-dimensional diffraction gratings by using laser diodes

Laser fabrication of 1D and 2D periodic subwavelength gratings on titanium films