Abstract:Ultra-thin flat heat pipes (UFHPs) are being explored as a potential thermal management solution to address the heat dissipation challenges of electronic devices. However, the ultra-thin process increases fluid flow resistance and reduces the heat transfer capacity, posing challenges for wick structure optimization. In this study, the effects of wick structure, vapor space, and fluid flow properties on the maximum heat transfer capacity are analyzed by a fluid flow model. Microgroove and microcolumn as wick structures are optimized, and the coupling effects between capillary pressure and fluid flow resistances are analyzed. The maximum heat transfer capacity and the corresponding optimal wick structure dimensions are determined by the vapor space friction and wick structure friction, which are calculated by structural friction coefficients (Sv and Sl) and fluid friction coefficients (Fv and Fl). The models of fluid flow friction chosen in previous literature are validated for accuracy by Fluent. When the height of the wick structure (h) or vapor space (H) increases, the optimal dimensionless wick structure height (h*) increases and decreases under a fixed porosity (epsilon), respectively. The optimal h* of microgroove decreases and that of microcolumn increases as the dimensionless spacing (l*) increases. When ethanol is used as the working fluid, the optimal h* of microgroove is 1.98 and the optimal h* of microcolumn is 0.48, under the condition of H = 0.3 mm, h = 0.15 mm, and epsilon = 0.5. This model also emphasizes the importance of working fluid properties on the design of the wick structure, and a higher value of Fl/Fv results in a lower optimal h*. Moreover, methanol and acetone exhibit higher heat transfer capacity compared with ethanol. This study aims to provide comprehensive design principles for optimizing UFHP heat transfer capacity.

Molecular dynamics simulation of heat and mass transfer in a nano-grooved heat pipe: Focusing on filling ratios' effect

Effects of using nanofluids on thermal performance and mass transfer in a micro-flat plate heat pipe

Heat Transfer Capacity Optimization Design of Microgroove and Microcolumn in an Ultra-Thin Flat Heat Pipe

Experimental Investigation of Thermal Conduction Performance on Silicon-Based Micro Flat Heat Pipe

Heat Transfer and Nanofluids Flow Through the Circular Concentric Heat Pipes: a Comparative Study Using Least Square Method (LSM)

A Novel Design and Implementation of an Annular Micro Heat Pipe Experimental System for Cooling Electronic Devices

Design, Simulation and Fabrication of A Silicon Micro Flat Heat Pipe with Axial Triangle Grooves

Numerical Simulations of the Liquid-Vapor Phase Change Dynamic Processes in a Flat Micro Heat Pipe

Analysis of the mechanism of enhanced heat transfer by nanofluids

Investigation on Transient Behaviors of Flat Plate Heat Pipes

Thermal Dynamics of Heat Pipes with Sub-Critical Nanopores

Three-Dimensional Numerical Analysis of Mini-Grooved Flat Heat Pipe Filled with Different Working Fluids with Experimental Validation

Visualization Study on the Enhancement of Heat Transfer for the Groove Flat-Plate Heat Pipe with Nanoflower Coated CuO Layer

Transient Study on Heat Transfer and Flow Performance of Alkali Metal Heat Pipe in Space Nuclear Powered Heat Pipe Radiator

Thermal Analysis and Maximum Heat Transport of a Micro Flat Heat Pipe with Axial Triangle Grooves

Effect of geometries on the heat transfer characteristics of flat-plate micro heat pipes

Theoretical Analysis and Experimental Investigation on Designing Method of Micro-Groove Heat Pipe

Filling Ratio Optimization for High-Performance Nanoengineered Copper-Water Heat Pipes

Thermal Characterization and Wick Optimization of Mini-Grooved Flat Heat Pipe for Electronics Cooling

Molecular dynamics study of convective heat transfer mechanism in a nano heat exchanger

Design and Experimental Analysis of Grooved Flat Aluminum Heat Pipe