Abstract:Purpose To develop a radiotherapy positioning system based on Point Cloud Registration (PCR) and Augmented Reality (AR), and to verify its feasibility. Methods The optimal steps of PCR were investigated, and virtual positioning experiments were designed to evaluate its accuracy and speed. AR was implemented by Unity 3D and Vuforia for initial position correction, and PCR for precision registration, to achieve the proposed radiotherapy positioning system. Feasibility of the proposed system was evaluated through phantom positioning tests as well as real human positioning tests. Real human tests involved breath‐holding positioning and free‐breathing positioning tests. Evaluation metrics included 6 Degree of Freedom (DOF) deviations and Distance (D) errors. Additionally, the interaction between CBCT and the proposed system was envisaged through CBCT and optical cross‐source PCR. Results Point‐to‐plane iterative Closest Point (ICP), statistical filtering, uniform down‐sampling, and optimal sampling ratio were determined for PCR procedure. In virtual positioning tests, a single registration took only 0.111 s, and the average D error for 15 patients was 0.015 ± 0.029 mm., Errors of phantom tests were at the sub‐millimeter level, with an average D error of 0.6 ± 0.2 mm. In the real human positioning tests, the average accuracy of breath‐holding positioning was still at the sub‐millimeter level, where the errors of X, Y and Z axes were 0.59 ± 0.12 mm, 0.54 ± 0.12 mm, and 0.52 ± 0.09 mm, and the average D error was 0.96 ± 0.22 mm. In the free‐breathing positioning, the average errors in X, Y, and Z axes were still less than 1 mm. Although the mean D error was 1.93 ± 0.36 mm, it still falls within a clinically acceptable error margin. Conclusion The AR and PCR‐guided radiotherapy positioning system enables markerless, radiation‐free and high‐accuracy positioning, which is feasible in real‐world scenarios.

[Research on the digitized technical remodeling in the positioned picture shooting part of homemade X-ray radiotherapy simulative position finder by use of CR and PACS]

Research on CT Simulation Used in Radiation Treatment Planning

Study of Archives Management and Transmission for DICOM Medical Images

High Resolution X-Ray Medical Sequential Image Acquisition and Processing System Based on PCI Interface

Technologies of Real-time Tumor-tracking during Dynamic Radiotherapy

The Upgrade Design of Image Processing Software in TC-SCAN Digital Radiography System

CCD Based Digital Radiography System

Registration of On-Board X-ray Images with 4DCT: A Proposed Method of Phase and Setup Verification for Gated Radiotherapy

Application of Digital Images in Quality Assurance of Radiotherapy

[A Positioning Error Measurement Method in Radiotherapy Based on 3D Visualization].

Realization of Operation Training Simulation System of Digital X-ray Machine

Scanning parameter measurement and projected image correction for microfocus X-ray imaging system

Research of Dynamic Image Calibration Technology in TC-SCAN Digital Radiograph System

Computed radiographic image post-processing for automatic optimal display in picture archiving and communication system

Real-time monitoring system with accelerator controlling: An improvement of radiotherapy monitoring based on binocular location and classification.

The Role of High-Energy Computed Radiography (CR) in Radiotherapy

Experimental and numerical studies on kV scattered x-ray imaging for real-time image guidance in radiation therapy

Development and Performance Evaluation of a 4π View Radiation Imaging System

Feasibility evaluation of radiotherapy positioning system guided by augmented reality and point cloud registration

A Practical Image Reconstruction and Processing Method for Symmetrically Off-Center Detector CBCT System

Design and Implementation of a Practical and Extensible Digital Imaging Workstation Based on PACS