Abstract:Chemical looping combustion is a novel flameless combustion, where the conventional combustion is divided into reducer and oxidizer with assistance of the oxygen carrier. Due to its instinctive CO2 separation, high efficient and environmental-friendly property, chemical looping combustion attains more concerns. Large-scale experimental unit is a vital to chemical looping combustion, especially the commercial development. The reactor configuration of the worldwide pilot units are fluidized bed or moving bed, and the pilot unit with packed bed has not been reported. In this study, the pilot scale chemical looping packed bed unit with a nominal thermal capacity of 30kWth is designed on the basis of previous laboratory scale investigation. The pilot unit includes four parts, which is gas system, reaction system, tail gas treatment and gas analysis system, and auxiliary electrical system. The pilot packed bed reactor is made from 310s stainless steel tube with a 0.089 m o.d., a 0.079 m i.d., and 2.0 m height. A K-type thermocouple with 13 measurement points is located at the center of the packed bed reactor to obtain the axial temperature profile. The packed bed chemical looping platform is constructed to demonstrate the feasibility of generating high purity hydrogen from syngas derived from biomass wastes with on-site carbon capture. Two testing runs were presented using 5mm × 4-6mm cylindrical oxygen carriers comprising of 50wt % iron oxide (Fe2O3). The pure CO and the mixture of CO and H2 with a flow of 15 SLPM are the fuels of the two tests. The first test resulted in a full CO conversion with a 25.0% conversion of the oxygen carriers during reduction, the production of 3.82mol hydrogen with an average purity of 98.0%, and the maximum temperature rise is 219K during air combustion. The second test leaded to a full fuel conversion with a 35.7% conversion of the oxygen carriers during reduction, the production of 4.67mol hydrogen with an average purity of 98.0%, and the maximum temperature rise is 290K during air combustion. The two testing runs, the first operation of packed bed chemical looping pilot unit, supported syngas-based chemical looping application for hydrogen and power co-generation with in suit carbon capture and also demonstrated the design of the 30kWth pilot chemical looping platform with packed bed reactor.

Chemical looping reforming of waste cooking oil in packed bed reactor

The ReSER-COG Process for Hydrogen Production on a Ni–CaO/Al2O3 Complex Catalyst

Kinetic Study of Reactive Sorption-Enhanced Reforming of Coke Oven Gas for Hydrogen Production

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

Bio-Oil Heavy Fraction as a Feedstock for Hydrogen Generation via Chemical Looping Process: Reactor Design and Hydrodynamic Analysis

Lab-scale Pyrolysis of Oil Sludge in Continuous Rotating Reactor:Mass/energy Balance and Product Analysis

Comparative Experiments on Recycling of Oil Sludge, Oil Shale and Biomass waste in a Continuous Rotating Pyrolysis Reactor

A novel high-entropy spinel ferrites (CoNiCuZnMg)Fe 2 O 4 catalyst for H 2 production via steam reforming of derived volatiles from polypropylene and waste cooking oil

Numerical analysis of multiphase flow in chemical looping reforming process for hydrogen production and CO2 capture

Design and exergy analysis of highly efficient chemical looping reforming processes of coking dry gas in double and triple reactors

Research of the combined reforming of bio‐oil model compound for hydrogen production

Catalytic hydroprocessing of waste cooking oil for the production of drop-in aviation fuel and optimization for improving jet biofuel quality in a fixed bed reactor

High-purity hydrogen production from real biomass pyrolysis vapors via a chemical looping process

Renewable hydrogen production from biogas using iron-based chemical looping technology

Sorption-enhanced Chemical Looping Steam Reforming Coupled with Water Splitting for Syngas and H2 Coproduction Using Waste Plastic As Fuel

Simultaneous CO 2 Capture and H 2 Generation Using Fe 2 O 3 /al 2 O 3 and Fe 2 O 3 /cuo/al 2 O 3 As Oxygen Carriers in Single Packed Bed Reactor Via Chemical Looping Process

Chemical Looping Enhanced Oil Shale-to-Liquid Fuels Process: Modeling, Parameter Optimization, and Performance Analysis

Generating Organic Liquid Products from Catalytic Cracking of Used Cooking Oil over Mechanically Mixed Catalysts

Packed Bed Chemical Looping Platform: Design and Operation of 30kw(th) Pilot Unit

Production of hydrocarbon-rich bio-oil from catalytic pyrolysis of waste cooking oil over nickel monoxide loaded corn cob-derived activated carbon